Gaahleri offers a case for storing airbrush needles, air caps and nozzles. Normally when you buy an airbrush with more than one needle, it usually comes with space to store it in the same case. However, it may happen that you buy an additional needle of a different size, or a spare needle, and it would be convenient to store it together with its nozzle and air cap so that they do not get lost, mixed up or damaged. It is in these cases that the Gaahleri case can be very useful.

The box comes packaged on a black cardboard box of approximately the same size.

It is an elongated metal case,black, 17x3 centimetres and two centimetres high.  The lid has a description of the box printed in light grey, together with the brand and logo. A neat design as usual in the presentation of Gaahleri products.

The lid is hinged to keep it attached to the case.

Inside it is completely occupied by a block of fairly sturdy black foam, with holes for the various elements.

There is room for two needles up to 13 cm long, which are stored without the plastic tube. There are also two holes for their nozzles and nozzle caps, plus three for air caps. The round holes have a removable foam ring inside, so you can store large or small parts and keep them snug.

There are also 18 metal plates engraved with labels from 0.15 to 1.05 millimetres. These badges have two tabs that fit into small slots in the foam to identify each set.

Finally there is a paper guide of the same size as the lid so that you can recognise which piece goes in which slot if necessary.

The parts are secured between the foam walls, although not that much as  to difficult the storage and removal. For safer operation, I would recommend retrieving the parts using tweezers, turning the box upside down could cause the delicate parts to fall off.

Conclusion

A useful little accessory to keep your extra airbrush needles and nozzles tidy, grouped and protected.