Introduction

MiniArt as a company is probably best known for their injection moulded plastic figures., and the diorama element sets that they have released. These have been joined by an impressive array of vehicles which cover, military, civilian and industrial. The industrial vehicles are joined here by a rural element in the form of a1938 D8506 tractor and on this occasion joined by a large trailer that provides more choices when it comes to display. At this time it was still common for horses to be used on farms for work, and of course steam power had been utilised. As such, I suspect that the piston engine tractor, were few and far between, and as such this offering from MiniArt will make an interesting model in its own right. That would also add a very interesting element to a diorama.

Review

This release from MiniArt, is provided in a cardboard tray with a separate card lid featuring the artwork. Upon opening the box, you will find a loose instruction booklet and a single sealed plastic bag containing all of the parts of the model. An examination of the parts reveals only one potential issue, and that is restricted to flow lines on some elements but these do not look or feel to have caused issues in the finish. The clear parts provided in this release are restricted to light lenses and a small photo etch fret contained in a card sleeve.
Tractors by their very nature are not really designed for comfort, but are designed to spend hours and hours going up and down the same field performing various tasks under load. Due to this, the look of most tractors has an industrial machine appearance to it, and that has been captured very well in this release from MiniArt. The body of the tractor consists of four main pieces to which you add smaller pieces to for detail, and this covers the cast nature of the real parts very well. There is no engine detail present to be exposed as the cowlings are not designed to be opened, and so beyond the drive sections that make up the chassis nothing else is seen.

The drive portion of the tractor has a nice diamond patterned floor with a seat that is supported by a spring and arm. Being an exposed area of the model that stands out, it is good to see that MiniArt have put some effort into the seat and the controls the operator had been provided with. The front axle of the tractor is assembled with the wheels in the forward position only. It would however, take very little effort to show the wheels in a turned orientation. The wheels of the tractor are the type we are used to seeing today and MiniArt has captured the detail well, the side walls of the rear wheels being separate pieces from the main tread area. The wheels are surprisingly fine as regards detail, and so care will be required when removing and cleaning the parts. Looking over the assembly of this model, I was very pleased to see that photo etch has not been excessively used, and where it has been used it adds to the finish of the model.

The trailer provided in this release has a multi part chassis rail system, and as such I would suggest that the wooden bed of the trailer is prepared and ready to go in order that you can locate the chassis and ensure its orientation is correct. This particular trailer is unusual as it is provided with leaf spring suspension, and that adds a visual interest to the underside of the vehicle. The wheels for the trailer are metal rims with solid rubber tyres, with the detail well represented. The front axle sits on a swivel plate, and so being articulated will add some visual interest if you were to show the vehicle in the process of turning. The sides of the trailer are all in the upright position, but the tailgate can be shown folded down or up. A nice touch here is a seat on the front of the trailer, and I do wonder whether someone will show it being pulled by horses as some point. The detail overall is very pleasing.

Two figures are provided in this release one being a German officer, I believe from the early war period due to the  officer wearing tricot breaches, and also the rest of the uniform has all of the features that indicate the period prior to the cloth shortage issue. This figure has been provided with an MP40, with the stock folded and you will need to make your own sling. Also provided are binoculars and what I believe to be a Luger holster, and a document pouch. The driver of the tractor, has an interesting position, leaning sideways and forward - I believe changing gear. This again appears to be the early uniform, due to the shaped pocket flaps being the detailed type, I do rather like the pose this one represents. The hand detail is exceptionable, but would benefit with a little bit of work on the fingers. No weapons or equipment are supplied for the driver, which I believe is an under sight, as I doubt that any soldier would be without his personal weapon nearby. The faces of both figures meet my expectations, for injection moulded plastic and while odd I like the fact that the ears are well moulded.

MiniArt has gone the whole hog on this release, and included a good mix of stowage for use on the trailer. These include three different sized wooden crates, and four 200 litre fuel/oil drums. These containers are from previous releases from MiniArt, and having seen them used a few times and they present a very realistic look if carefully painted.

MiniArt has included two finishing options for the tractor and the trailer with them both being in military service one is a finishing option in service with a unidentified Luftwaffe unit during the war, and the other being a Wehrmacht unit on the Eastern front. Now these finishing options show one in plain grey, and the other with a simply applied camouflage. But I would suspect these would just be taken from a farmer, used as required and if the farmer is lucky returned. Due to this I believe you could finish either item, in a suitable colour of the period.

Conclusion

This release from MiniArt in 1/35th scale, would make a great addition to the diorama base they produced featuring farm buildings and yard. Looking over the model, nothing really strikes me as being amiss. My only concern being, the risk of damage to some of the very finely moulded parts that make up the model. Something that I do appreciate, is the effort put into the seat as while a small aspect of the model I find it visually appealing.