Shipwreck! S.S. 'Lucky'
Sean Hadfield [Windysean] has shared his kitbashing and scratchbuilding skills with us before and now we see his latest creation - a shipwreck next to a railroad bridge.
HO Scenery: ShipwreckSean shares this media magnet model that was featured in television coverage of the Mad City Model Train Show. Sean narrates his process thusly;
To cut the hull on an odd slant, I sighted across a straightedge and marked dots on the hull along my sight-line. Then I wrestled with a hacksaw while maintaining the line of the markings.
Ideally, I would have mounted it to a scrap wood block at the desired angle and then run it through a band saw.
Posts and Lots of Pieces
Just tune out the world and keep measuring, cutting, and adding little styrene items. The 1/87 scale sailor helps me determine sizes. The 1/108 scale kit lends partsó search light, navigation markers, and bits. The wheelhouse roof is not glued, so I can paint black inside and add windows after painting.
Light gray, faded, patchy prime coat, dusted white overall. The very heavy paint is cracking and pulling better than I hoped.
The name decals from the kit, ironically named "Lucky", were white, so I needed to paint a dark background for them.
For the broken glass, I cut random triangles and sharp shapes from clear styrene. Then, I laid a bead of tacky craft glue around the inside of the window openings and randomly placed pieces in it.
The awning was a lesson in itself. I fit and cut a pattern from scrap paper, then traced onto facial tissue. I brushed on diluted white glue, but to my surprise, it expanded in size, so I fit it back in place on the frame to dry. When it was dried, I removed it and cut it to size again with scissors.
Then, off the boat, I brushed on a thin coat of white craft paint. Using the stencil in the photo, made from a business card, I dry-brushed on the blue stripes. The final awning was glued down with Aleene's Tacky Craft Glue. For the tears, I re-wet the white glue and used a hobby knife to slash it, then poked the sagging parts with a toothpick until it hung down correctly.
The paint looked too dark, so I dry-brushed more white above and red below, and it brightened up nicely. The moldy green was heart-stopping for me, because it was so bold. Until then, I had been using only subdued colors.
It looked unbalanced without the bow mast (bowspirit?), so I extended a piece of clear plastic to the center front, and mounted another mast, painted, and strung.
Copyright ©2020 by Sean Hadfield. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of Armorama, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2018-02-24 20:27:09. Unique Reads: 6952