Campaigns: Active Campaigns
Campaigns that are either in planning or underway should be grouped here.
Hosted by Richard S.
Anti-Aicraft :: 2019
TacFireGuru
Visit this Community
Colorado, United States
Joined: December 25, 2004
KitMaker: 3,770 posts
Armorama: 2,263 posts
Posted: Friday, August 16, 2019 - 08:54 AM UTC
Some work on the concrete base. Paint, wash, and dust.



Seems the lighting washes out the gray with the gunmetal.




Mike
petbat
Visit this Community
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Friday, August 16, 2019 - 10:05 AM UTC
The final build looks fantastic Mike D. Love the way it turned out.

Mike H, getting there slowly but the patience is worth it.
TacFireGuru
Visit this Community
Colorado, United States
Joined: December 25, 2004
KitMaker: 3,770 posts
Armorama: 2,263 posts
Posted: Sunday, August 18, 2019 - 12:06 PM UTC
I have some "blue foam" board and some desert dust and desert "ground cover." I believe I'll have the time to do a little dio for this gun (as an emplacement). We'll see. Maybe add an Italian truck to it, if I can find a decent one.

I'm also not sure how much I like the color of the gunmetal I used. I may have to fall back to one of the other brands I've used in the past - darken it up some.

Mike
MLD
Visit this Community
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,569 posts
Armorama: 2,070 posts
Posted: Sunday, August 18, 2019 - 12:57 PM UTC

Quoted Text


I'm also not sure how much I like the color of the gunmetal I used. I may have to fall back to one of the other brands I've used in the past - darken it up some.



Mike, I see what you mean about the metallic being 'light'. Have you used the new Tamiya "Dark Iron"? That, a dark brown wash and a light metallic pigment burnishing is my favorite combination lately.
What else do you use?

Mike
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Sunday, August 18, 2019 - 04:57 PM UTC
It's time for me to join with a 8,8 cm. Flak 37.

Besides Tamiya's kit I'll use Eduard's PE gun shield.

Will build a Flak belonging to 1st(Heavy) Battery/the Anti-Aircraft Artillery Detachment of the Armoured Brigade/Bulgarian Royal Army 1944-45.

My plans are to build also a Trumpeter Sd.Kfz.7 to tow the Flak:


Starting picture from last Friday:


Some progress from two modelling sessions:


petbat
Visit this Community
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Tuesday, August 20, 2019 - 08:41 AM UTC
An Oldie, but still quite a good kit by today's standards. Built a couple of these over the years and still have an unbuilt one.
Kanguroo
Visit this Community
Vietnam
Joined: May 07, 2006
KitMaker: 416 posts
Armorama: 312 posts
Posted: Wednesday, August 21, 2019 - 03:54 AM UTC
Hi all,

I get a Russian TOR to this great campaign.



K.
eMan
#298
Visit this Community
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Wednesday, August 21, 2019 - 06:47 PM UTC
Getting start, here is my entry, Tamiya 1/35 Flak Panzer IV Wirbelwind.


ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Saturday, August 24, 2019 - 08:13 AM UTC

Quoted Text

An Oldie, but still quite a good kit by today's standards. Built a couple of these over the years and still have an unbuilt one.



Fully agree with you, Peter!

After some hours of flash cleaning, parts trimming, ejection marks filling(although I found some unattended ones after looking at the pictures I've taken) and immense PE fun, I have completed the construction of my Acht-Acht:





I might add a bit more PE to the bogeys/trailers of the gun.

Next will be cleaning(need to get rid of those fingerprints on the gun shield), priming and painting,

Happy modellbuilding!

GulfWarrior
Staff MemberCampaigns Administrator
ARMORAMA
Visit this Community
Texas, United States
Joined: January 05, 2010
KitMaker: 1,051 posts
Armorama: 1,029 posts
Posted: Saturday, August 24, 2019 - 02:28 PM UTC
The Trumpeter SA-4 Ganef is now under way!



Any word on whether or not this one is going to be extended. I think I might pushing it to finish by October 1st.


petbat
Visit this Community
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Saturday, August 24, 2019 - 07:01 PM UTC
Ja, Ja. Ist Gut Herr Angel.
165thspc
#521
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 9,465 posts
Armorama: 8,695 posts
Posted: Saturday, August 24, 2019 - 07:30 PM UTC
Nice one Angel1
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Saturday, August 24, 2019 - 11:16 PM UTC
Recht schoenen Dank, Herr Peter!
Thanks, Mike!

GulfWarrior
Staff MemberCampaigns Administrator
ARMORAMA
Visit this Community
Texas, United States
Joined: January 05, 2010
KitMaker: 1,051 posts
Armorama: 1,029 posts
Posted: Sunday, August 25, 2019 - 02:08 PM UTC
I've started on the lower hull. There are two different options for idler wheels. One set looks like 70s mag wheels like the rest of the roadwheels. Another set looks to be from a possible early version. I went with the set that more closely matched the road wheels.



I mounted the arms onto the lower hull; but left the wheels off for now. I'll mask the ends off when I start painting.

If someone knows the difference between the two types of idler wheels let me know.





SpeedyJ
Visit this Community
Bangkok, Thailand / ไทย
Joined: September 17, 2013
KitMaker: 1,617 posts
Armorama: 1,150 posts
Posted: Sunday, August 25, 2019 - 03:36 PM UTC
Hi all.
I'm afraid I will not be able to finish this campaign, due to serious health problems. Hospitalization and some upcoming surgery the coming weeks, will hold me away from the workbench for the coming months.
Keep up the good work everybody.

Kind regards,

Robert Jan
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Sunday, August 25, 2019 - 04:01 PM UTC
Sorry to hear that, Robert...

Hope everything goes as planned and look forward to see you at the modelling bench again soon!

Angel
BogiBg
Visit this Community
Västra Götaland, Sweden
Joined: May 29, 2018
KitMaker: 397 posts
Armorama: 388 posts
Posted: Sunday, August 25, 2019 - 04:45 PM UTC
Robert, good luck, hope to see you back soon.
MLD
Visit this Community
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,569 posts
Armorama: 2,070 posts
Posted: Sunday, August 25, 2019 - 11:06 PM UTC
Robert,
I’m sorry to hear the bad news and am wishing best of luck and a speedy recovery to you.
You can always bring your build over to ‘unfinished business’ or ‘getter done’ campaigns when you are back in your feet.
Mike
petbat
Visit this Community
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Monday, August 26, 2019 - 08:50 AM UTC
Hope everything is okay and the recovery goes smoothly Robert. Looking forward to seeing you back here in full swing soon.

Richard. The chassis is based on the GM series of tracked vehicles. Some older ones were made by MTZ and this may be the reason for the two different types of idler, else it may be a remnant of another vehicle model on the same chassis. Not sure what the two in the kit are, but most pictures show the 4 spoke with holes in the spoke and between the spokes...
GulfWarrior
Staff MemberCampaigns Administrator
ARMORAMA
Visit this Community
Texas, United States
Joined: January 05, 2010
KitMaker: 1,051 posts
Armorama: 1,029 posts
Posted: Monday, August 26, 2019 - 02:27 PM UTC
Here are the two different types of idler wheels:



See what I mean?



petbat
Visit this Community
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Monday, August 26, 2019 - 09:18 PM UTC
Go the bottom pair.... loads of pics with them....

The other looks like the type used on the Akatsiya, also on a GM 123/124 chassis

GulfWarrior
Staff MemberCampaigns Administrator
ARMORAMA
Visit this Community
Texas, United States
Joined: January 05, 2010
KitMaker: 1,051 posts
Armorama: 1,029 posts
Posted: Monday, August 26, 2019 - 10:48 PM UTC

Quoted Text

Go the bottom pair.... loads of pics with them....




That’s what I was thinking!

Thanks Peter!


TacFireGuru
Visit this Community
Colorado, United States
Joined: December 25, 2004
KitMaker: 3,770 posts
Armorama: 2,263 posts
Posted: Tuesday, August 27, 2019 - 03:31 AM UTC

Quoted Text


Quoted Text


I'm also not sure how much I like the color of the gunmetal I used. I may have to fall back to one of the other brands I've used in the past - darken it up some.



Mike, I see what you mean about the metallic being 'light'. Have you used the new Tamiya "Dark Iron"? That, a dark brown wash and a light metallic pigment burnishing is my favorite combination lately.
What else do you use?

Mike



Mike,

I've used Tamiya's gunmetal and Ammo's GM. Tamiya's is good for brushing smaller details (otherwise it needs to be thinned for the AB). Ammo's is great for the AB (I've not brushed with it yet).

I reshot the barrel assembly with Ammo's yesterday and I am quite pleased with the "base" color - I'll dry brush some of the AK Extreme later today (I hope) and post up a "new and improved" gun barrel.

I knew someone would offer up a suggestion for an improvement: Thank you! (a pleasurable thing about this site)

Mike
ayovtshev
#490
Visit this Community
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Tuesday, August 27, 2019 - 05:01 AM UTC

Quoted Text

Go the bottom pair.... loads of pics with them....
The other looks like the type used on the Akatsiya, also on a GM 123/124 chassis



Ditto!

Here is walkaround of the Krug in St.Peterburg's Artillery Museum-it has the lower part(T-55 type) idler wheels:
https://yadi.sk/d/jD-NA-3F3Pqa7F

And a picture of one Bulgarian Krug from the National Museum of Military History/Sofia, showing the same type of idler wheels:
https://www.flickr.com/photos/massimofoti/11733223655/in/album-72157636746382615/

I guess the upper type of idler wheels is the early one, while the lower (star-shell) type are the late ones: in the late 1980's my country bought a battery of Akatsiyas for evaluation purposes.One of them is on display at the NMMH/Sofia and it has the same star-shell type idler wheels:
https://www.flickr.com/photos/massimofoti/10479489545/in/album-72157636746382615/

Pictures from NMMH/Sofia come from Massimo Foti's Flickr album and are posted here for discussion purposes only.


GulfWarrior
Staff MemberCampaigns Administrator
ARMORAMA
Visit this Community
Texas, United States
Joined: January 05, 2010
KitMaker: 1,051 posts
Armorama: 1,029 posts
Posted: Tuesday, August 27, 2019 - 01:57 PM UTC
Here's the lower hull of the Krug / SA-4 with all the roadwheels, driver sprockets and idlerwheels dry-fitted. I haven't put the return rollers on yet. I'll wait until after they've been painted.