login   |    register
Skunk Models Workshop [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
148
Tow Tractor
Tow Tractor for US Air Force & Missile Cart
  • move

by: Russ Amott [ RUSSAMOTTO ]


Originally published on:
AeroScale

Tow Tractor for US Air Force & Missile Cart
SkunkModels Workshop has released a new tow tractor set to accompany aircraft for dioramas.

The model
The model kit, which includes two tow tractors and one missile cart, comes in the standard end opening box that SkunkModels uses. The box top shows the assembled model in a diorama setting and on the rear of the box is a simple painting guide with multiple side views of both the tractor with draw bar and the missile cart.

The tow tractor is not identified specifically by model number, but the name "Harlan" is prominent on the front. It appears to be the Harlan Classic HTA 30-60 series tow tractor. The prefix of this series-30, 40, 50, 60-indicates the weight the tractor is able to tow in thousands of pounds.

The contents of the box consist of six sprues, four in light gray and two in dark gray styrene.
The light gray plastic is brittle and soft and there was some flash present. Molding of some parts is very good with nice small details, but on other parts the detail is much softer.

Sprues
The A sprue (X2) has the tractor floor, rear deck and engine cover, grille and rear plate, seat, steering wheel and front rims. The only ejector pin marks I saw that needed attention were in the front wheel wells.

Sprue B (X2) has the tractor sides, firewall and instrument panel, rear wheels and two piece tires for the front and rear. It also has the towing boom, with separate wheel section. There are four tire chocks included.

In the dark gray styrene, there are also A and B sprues, with the parts to make one missile cart. This is from the previous "Missile Cart for USAF/NATO" set 48004. Quality of the molding on these sprues is much better and the styrene appears to be of better quality. I had a couple of parts that were broken off the parts tree but were undamaged. There were a few minor ejector pin marks but they appear to be on hidden surfaces.

The kit tractor is very similar in appearance to this actual vehicle in use by the ROCAF. http://blair-military.blogspot.com/2010/12/hta-40.html and also very much like a previous resin release from KASL of the Harlan HTA-40 with tow bar for the Mirage 5000. Differences between the SkunkModels Workshop Harlan tractor and that used by the ROCAF show that the "HARLAN" logo on the front plate has the center of the A and R cut out and the name should appear on the side panels on the engine. The kit tires only have tread detail on the side walls. The "T" handles on the engine access panels on the kit are just bumps.

Assembly
I assembled one of the tractors. Fit was generally good although some filler will be needed to give a one piece appearance to the sides. There were no real issues and it only took a short time to assemble. I did not complete the tires as I wanted to paint the rims with the tractor. When completed the kit looks like a Harlan tow tractor, minus the missing name cutouts on the side panels.

There are no decals for the kit so you will have to go through any spares you have to add the instrument dial faces and any other serial numbers or markings you would like to see.

Summary
In addition to the ROCAF, I found online images of this tractor in use by the air force of Singapore, in a dark green paint scheme, and references to its use in France. While it is used in many commercial airports around the United States and internationally, I could find no references to use of the Harlan tractor in the USAF, but others with better base access may know of its use, either currently or in the past.

This kit is listed at LuckyModel, the parent company of SkunkModels Workshop, for $13.99. It will arrive at your doorstep for $18.90 US or just over 13 Euros. The detail is simplified, but it is easy to build. There aren't a lot of this type of model kit available. It should be a suitable fill in for a diorama at an affordable price.
SUMMARY
Highs: Easy to assemble kit. Two tractors and an added missile cart.
Lows: Soft or missing details. No decals included. May not be used by the US Air Force.
Verdict: This is an simple, affordable accessory for an air base diorama.
Percentage Rating
70%
  Scale: 1:48
  Mfg. ID: SW-48028
  Suggested Retail: $13.99
  Related Link: US Navy Carts
  PUBLISHED: Apr 28, 2013
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.47%
  MAKER/PUBLISHER: 83.44%

Our Thanks to Skunk Models Workshop!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Russ Amott (russamotto)
FROM: UTAH, UNITED STATES

I got back into the hobby a few years back, and wanted to find ways to improve, which is how I found this site. Since joining Armorama I have improved tremendously by learning from others here, and have actually finished a couple of kits. I model to relax and have fun, but always look to improve. ...

Copyright 2019 text by Russ Amott [ RUSSAMOTTO ]. All rights reserved.



Comments

Fred, thanks again for helping with this. Does anyone have images of this in USAF service?
APR 29, 2013 - 09:26 AM
It appears that these will be acceptable ramp roadsters in a diorama. I think they look good and will not steal the attention from the airplane.
MAY 01, 2013 - 12:50 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move