Flak 44 vereinfachte Bettung (1:35)
The new 12,8cm Flak 44 vereinfachte Bettung Conversion Kit is ready
E-50 Combat Recon Vehicle (1:35)
For what-if enthusiasts, Custom-Scale offers a conversion set to build an armed reconnaissance vehicle using the E-50 chassis.
Faun L900 Cab Conversion (1:35)
Custom-Scale offers a conversion kit to build a hard top cab for the Faun L900.
Available from Custom-Scale is a conversion set to build the winged version of the German A4, commonly referred to as the V-2.
Büssing NAG Conversion (1:35)
Custom-Scale provides a set to build a Büssing NAG 4500 as a mobile FlaK platform.
Upgrade your Hanomag SS-100 build with this new bundled set from Custom-Scale.
Detail up your Faun L900 and trailer build with these new items from Custom-Scale. Also available is a front grill set for the Hanomag SS-100.
Custom-Scale adds two new kits to its catalog.
Since last reported on, four new kits have been added to the Custom-Scale catalog. Available is a 1/35 scale conversion set to build a twin AA gun platform, full kits for special trailers, as well as a turret set for a Panther-based AA gun platform in braille scale.
Recently added to the Customscale catalog are three conversion sets for German WWII modelling subjects.
A recent release from Customscale is a conversion set that builds another version of the Hanomag SS-100 crane truck, depicting a vehicle with a 4-door cab configuration.
German Twin FlaK, AA Rocket (1:35)
Two new sets have been added to the CustomScale catalog. Listed are a Rheinmetal-Borsig Fire Lily F-55 rocket with transport trailer and a twin 55mm anti-aircraft gun and turret conversion set for a Panther Ausf. G chassis.
5,5 cm Flak Gerät 58 (1:35)
New anti aircraft gun from Custom Scale, the German 5,5 cm Flak Gerät 58.
German Pedestal Mount (1:35)
A recent release from Customscale offers a display base for a FlaK gun or missile launcher as a fixed installation.
Berlin 1946 (1:35)
Recent releases from Customscale venture into figures and a diorama base for a what-if street fighting scenario in Berlin. The series was in collaboration with model artist David Strauss.
Enzian E-1, E-4 on Ramps (1:35)
Customscale has released two kits of this WWII-era German ground-to-air missile together with launch ramps.
Hanomag SS-100 Feldkran (1:35)
Custom Scale has a new conversion for the Hanomag SS-100, now adding a large crane on the back.
VK1602 Leopard Turret (1:35)
A recent release from Customscale provides a correction set for the Hobby Boss kit.
Hanomag SS-100 Detail Set (1:35)
Customscale has released its kit that corrects and provides further details to help improve the Takom kit.
PzKpfw II Luchs 5cm (1:35)
Custom-Scale, in collaboration with MR Modellbau, has released a conversion kit to build a PzKpfw II Ausf L with a 5cm gun.
Enzian E-4 (1:35)
Custom-Scale follows up with another release on the Enzian surface-to-air missile, this time with a kit of its designated production version, the E-4.
The latest from Customscale is the WWII-era German surface-to-air missile, the Wasserfall.
WWII German SAM (1:35)
New from Customscale is its kit depicting the Enzian, a German anti-aircraft missile developed during the Second World War.
Fire Lily F-55 A-1 (1:35)
Custom-Scale adds another to its line of rocket of kits, this time an anti-aircraft weapon developed and tested by the German company Rheinmetal-Borsig during the Second World War.
Hanomag RL 20 Tractor (1:35)
Of late we have seen U.S. tractors in kit form, this time around a kit of a German-made vehicle is provided to us by Custom-Scale.
E-50 Turret Replacement (1:35)
Looking for a different turret for your E-50? Check out Custom-Scale’s latest offering.
Planning on building Takom’s Hanomag SS-100 as an artillery tractor? Take a look at Custom-Scale’s 8.8cm ammunition bins to complete your ensemble.
E-50 Flak41 (1:35)
New paper panzer conversion from Customscale, a huge turret with a Flak41 for the E-50.
German Special Trailer 206 (1:35)
Custom-Scale’s latest is the Sd.Ah.206 mit Behelfslafette für leichtes Einsatzgerät ("Special Trailer 206 with Carriage for Light Auxiliary Equipment")
Rhine Maidens in Braille (1:72)
Custom-Scale presents its Rheintochters in 1/72 scale and in various firing platform configurations.
Hanomag Bauernschlepper (1:35)
Custom Scale released a new kit in 1/35 scale, a German Hanomag tractor.
Gepanzerter Sd.Kfz. 7 (1:35)
Customscale informed us on their latest kit, a 1/35 conversion set for adding full armor to the Sd.Kfz. 7.
8,8 cm Flak Base (1:35)
Customscale released another Flak base in 1/35 scale, this time it is a reissue of a discontinued MR Modellbau kit.
Customscale released another impressive conversion in 1/35 scale. This time it is a "what-if" anti-aircraft rocket project based on E-100 chassis.
Transporting the Flak (1:35)
Customscale released a new 1/35 scale kit, a base for Flak transport.
Gebirgsflak w Mule (1:35)
Customscale released a new kit in 1/35 scale... something a bit different.
Suicide Rocket V1 Conversion (1:35)
Customscale released a new kit in 1/35 scale, a conversion for Bronco's V1 turning it into a manned rocket.
Fahrbarer Kran (1:35)
Michael Baldeweg from Customscale informed us on his new kit, a heavy German crane in 1/35 scale.
Customscale released a new full resin kit in 1/35 scale. This time it is a trailer for Flakzwilling 43.
Customscale keeps on releasing really interesting German WW2 conversions... this time we present the 1/35 scale 2cm Gebirgsflak on RSO conversion kit.
Michael from Customscale informed us on his new conversion kit in 1/35 scale... an up-armored Sd.Kfz. with some extra firepower.
Michael Baldeweg from Customscale informed us on his upcoming conversion giving some additional firepower for your 1/35 scale Schwimmwagen.
Customscale released two new kits in 1/35 scale. The first being a very interesting conversion for their existing GW Panther Gerät 5-1211 w Pak 44, and the other is ammunition set for 3cm Flak.
Customscale is well know for their 1/35 scale resin kits of German secret weapons and paper panzers. Now, the company ventures in braille scale with their first release depicting GW Panther Gerat 5-1211 w PAK 44.
Customscale just informed us on their new kit, a Strofftrailer for the V2 program.
Gebirgsflak 38 (1:35)
Customscale has been very busy. This time we have news of their latest release, a full resin Gebirgsflak 38.
Michael Baldeweg from Customscale informed us about his latest release, a very comprehensive Paper Tank conversion kit in 1/35 scale.
12,8cm PAK 44 Krupp (1:35)
After introducing Customscale to Armorama yesterday, we have a new story on the company and their products. This time we present Customscale's new full resin kit featuring PAK 44.
Paper Panzers in Resin (1:35)
Customscale is a company from Germany, specialized in producing World War 2 German secret weapons and Paper Tanks in 1/35 scale, available as full resin kits or conversions. The company has a very impressive list of kits, but today we will promote their latest set designed to convert Panther into a version with 8.8cm Flak41.