135
Sdkfz 7 towing a Sfh 18

  • move
Vicente Muņoz shares with us some images of his German Sdkfz 7 towing a Sfh 18 15 cm field howitzer. The model of the Sdkfz 7 is from Dragon Models and the Sfh 18 15 cm field howitzer ids the Trumpeter offering both in 1/35th scale. The Sdkfz 7 has been upgraded with photo etch from Voyager Model and the Sfh 18 15 cm field howitzer has been treated to photo etched upgrades from Griffin Models.
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move

About the Author

About Vicente Muņoz (bycho)
FROM: ALICANTE, SPAIN / ESPAņA


Comments

Very nicely done!
APR 28, 2014 - 03:53 AM
Great job. I agree that the barrel sits too close to the ground to look naturally, but a small detail. Very nice weathering.
APR 30, 2014 - 07:50 AM
Just when I think I've been impressed on this site and can't be more WOWWED! Something like this comes along! Only one question-on the wheels for the gon, are they aire filled or solid rubber? I only ask because if they were solid, there would be "chunks" missing from the edges.
APR 30, 2014 - 01:18 PM
Still WAY BEYOND my abilities! AWESOME!!
APR 30, 2014 - 01:18 PM
They were solid. But certainly you're not saying every wheel started deteriorating as soon as it rolled out the factory doors, right? They could have bits worn off -- but certainly TONS of contemporary pics show the in very good condition.
APR 30, 2014 - 02:51 PM
What Roy said. I have looked at more Sd.Kfz.7 prime mover photos than any other German vehicle, and the hard rubber tires on these field pieces held up well initially. There is a paucity of photos from the LW period, however, so we don't have a ton of evidence how the tires lasted over time or how often they needed to be replaced. The only other suggestion I would add besides the angle of the barrel is that these guns had a canvas bag over the muzzle to prevent road dust from fouling the rifling. But that's a small quibble for an outstanding set-up.
MAY 01, 2014 - 01:40 AM
Hi. Some discussions on the gun seems to be a worldwide issue. The link below shows a Dragon kit. The experts however discovered the same 3 points of mistakes made by the builder. LINK It's Dutch, but the pictures speak for themselves. Cheers, RJ
MAY 01, 2014 - 02:02 AM
here's a photo of a museum piece LINK I wasn't saying that the tires should be completely disentegrated, I was just thinking that with the level of weathering/chipping on the paint of the gun, the tires should show a bit more wear. I was on M-1's US Army for 4 years, seen first hand what the wear on that rubber is like on several different types of vehicles
MAY 01, 2014 - 02:13 AM
Excellent point! I concur
MAY 01, 2014 - 05:15 AM
I think it's a judgement call. First of all, the photo referenced is of a relic: we can't use surviving vehicles for this sort of discussion because we don't know what its restoration state is, how it is stored or when the last time those tires were replaced. We need to go by historical photos. The gun in this model set might or might not be the same age as its prime mover, and the tires might've been replaced at some point. What we tend to forget about real war is the constant turnover of materiel as things wear out. Motor pools have to swap out parts, assemblies and even entire vehicles as conditions permit and the demands of battle require. Personally, I tend to take a bite out of my tires/wheels because the fact that most fighting in WW2 was done off-road would mean a lot of stones, gravel and other debris would be impacting rubber tires or road wheels. On this SU-100 build, I notched most of the tires, but not all to reflect the fact that some wheels might have been repaired: That having been said, I would not mark him down if I were judging this model in a competition, it's superb.
MAY 02, 2014 - 02:40 AM