How To: Tape Cutting Board
a cutting board for masking tapeEveryone knows how important a crisp edge is when masking straight lines. Most of the time it is necessary to trim the edges from a piece of masking tape in order to ensure that the edge is as straight and free of fuzz as possible. Cutting the tape after it has been placed on a piece of glass is often the best way to do this.
After searching for a suitable piece of glass, I hit upon the idea of using an inexpensive photo frame from a Dollar Store. This type of frame uses a fibreboard backing with a glass cover held in place by metal spring clips. See photo 1
Remove the frame from the Styrofoam packing tray and set it aside. See photo 2
Unclip the glass from the fibreboard back and reverse the label so the plain white side is visible (if the label doesn't have a plain back, substitute a plain white piece of paper). See Photo 3
Clip the glass back on top, and place the frame back into the Styrofoam tray. Using wide (5cm) masking tape, tape around the edges of the frame to securely hold it into the Styrofoam. Cover the back to protect the Styrofoam from stray model cement. See Photo 4
Your cutting board is now ready for use.
Copyright ©2019 by Richard Tonge. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of Armorama, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2013-11-30 00:35:29. Unique Reads: 7870