Campaigns: Completed Campaigns
Campaigns that are completed should be grouped here.
Hosted by Richard S.
Unfinished Builds 2017
Kanguroo
Visit this Community
Vietnam
Joined: May 07, 2006
KitMaker: 416 posts
Armorama: 312 posts
Posted: Wednesday, November 08, 2017 - 02:40 PM UTC

Quoted Text


If you don't mind me asking, how did you get so far finished with one part of the build and not the other?
I am not 'throwing stones', I've got a LOT of part built kits, I am just wondering how they got to this point.



Hi Mike,
On the T-64A hull, I tried to paint the enamel Model Master (especially Forest Green 1713 instead of Mr.Color Green 303). And on the Leo 2A6 turret, I used the lacquer Mr.Color set for German NATO. I think they're completed in the following days. But because of running along many campaigns nowadays, I almost missed them.
By the way, your camo painting on the ZSD90 is interactive.
Regards,
K.
supplyssg
Visit this Community
Connecticut, United States
Joined: February 04, 2003
KitMaker: 82 posts
Armorama: 71 posts
Posted: Friday, November 10, 2017 - 09:00 PM UTC
Tamiya, 3T Cgo Trk (Opel Blitz), 1/35

Hi all,
Just a quick update of my early model 1939 Polish Invasion Opel Blitz.
Michael, thank you for the vote of confidence. It's been well over a decade since I've last done any serious modeling and this vehicle interior served as a test bed for not only finding out if I have any painting skills left after such a hiatus, but also a chance to work with some of the many new modeling products that are now available.
If anyone is currently building this kit or has it on their radar you can check out my build progress on the 1939 Poland campaign hosted by Hudson29 pages 9,11,13,20,21.
Below another interior pic which will, when completed, be virtually unseen through the small cab windows. Oh well! It was good practice.


Well, this project has been nothing but a series of firsts for me. Below I've decided the build and detailing have gone on long enough and that it is now time for paint. This is the most photo etch brass, resin aftermarket and scratch building I've done to date and I can't procrastinate anymore or I'll miss yet another campaign!


Headlight covers are made from one of my favorite modeling materials - wine bottleneck lead foil as is the front window flap added to the Mig resin tarp. Early invasion photos show virtually all vehicles with some sort of headlight cover in a wide range of materials. These will be painted to represent a heavy russet leather unit made rendition with material I figured would be readily available to a Cavalry unit and easily fabricated by the organization's saddlers and leather workers.


Well, now it's time to paint and my main reason for procrastinating all along. It's been a long, long time. My airbrush hasn't seen the light of day since the late 90's and it's still in the original box from 1979 when I purchased it as a teenager determined to be the next Shepard Paine. Oh...and I'm going to try and use Vallejo Primer. I've never primed before and I've only ever worked with enamels and oils. This acrylic stuff is new to me and I'm a bit apprehensive at this point.
Below - grit my teeth and got a coat of primer down, spattered a bit and realized I need to thin a little more, but the primer leveled out beautifully and looks flawless when dry.

After much YouTubing and forum surfing I decided to try the black and white method using this time Tamiya acrylics, white obviously, and also a first time use of this paint in an airbrush.

...more progress pics coming soon.

69mudbone
Visit this Community
California, United States
Joined: April 26, 2016
KitMaker: 362 posts
Armorama: 285 posts
Posted: Friday, November 10, 2017 - 10:48 PM UTC
Coming along nicely
GaryKato
Visit this Community
California, United States
Joined: December 06, 2004
KitMaker: 3,694 posts
Armorama: 2,693 posts
Posted: Friday, November 10, 2017 - 11:39 PM UTC
I haven't used my airbrush in a while and it's probably why I am dragging my feet on the Merkava. It's not so much the painting as it is cleaning up the airbrush and any mess I've made. And I always seem to miss a spot.

So far I've puttied up the turret seam and sanded it but I think I need a bit more putty.
SGTJKJ
#041
Visit this Community
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Saturday, November 11, 2017 - 11:31 AM UTC
Very nice progress and work on the Blitz, Richard.

Looking forward to see more.
MLD
Visit this Community
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,569 posts
Armorama: 2,070 posts
Posted: Monday, November 13, 2017 - 06:43 AM UTC
Richard, that Blitz is beautiful! Don't rush it on our account. It's a hell of a piece of work!

Progress on the tracks for the ZSD.. the razor blade is for my wrists in case I get the bright idea to do tracks with rubber blocks on the outside AND inside ever again...

Going with the primer grey, rubber, bunch of pigments, fixed with a dark wash, then stippled with a dark black/brown effect I saw go past online.
Buckeye198
Visit this Community
Ohio, United States
Joined: May 02, 2010
KitMaker: 596 posts
Armorama: 265 posts
Posted: Tuesday, November 28, 2017 - 04:36 AM UTC
Joining this campaign quite late, but hopefully still enough time for me to squeeze in an entry. I recently got back into the hobby after about 3 years away from my workbench. My current build is a Tamiya P-51B (starting out easy!) but for this campaign I'm going to finally paint my Tamiya Flakpanzer Gepard that I built 5 years ago. Here's my build log, for anyone who's interested to see what I was working with.

TLDR: I had a lot of trouble airbrushing and only a month or so free to build, so I made my Gepard completely OOB, not even putty allowed (my Squadron Green tube had dried up). As a result, I had a fully articulate model but with a good number of seam lines and gaps.


First things first. This model feels way too light in my hands. It's entirely a personal issue and won't affect the model in any way on the shelf, but it just bugged the hell out of me. Made "patties" of metal BBs and duct tape that I'll stash in the hull once I'm done painting.


I pulled off the wheels, drive sprockets, and side skirts. I also knocked off the antenna blocks, and the grenade launchers fell off on their own. I was careful to keep each side's parts isolated.


Bundeswehr Gepards didn't wear their side skirts. This model is already technically inaccurate for a number of reasons, so I'll be including the side skirts to hide some track and hull issues. Plus they look cool. The Gepards I saw that did have skirts tended to have notches cut out towards the drive sprockets, so I did that too.


I also cut out the handles, which were actually raised rectangles originally...doesn't make much sense, but whatever. It's fixed now.


Other modifications that I neglected to photograph include:
--filling in gaps with Tamiya putty (infinitely better than Squadron putty)
--placing sheet styrene over significant holes along the suspension (I think intended for RC components?)
--sealing up the rear instrument cabinet (very ugly seam if left movable, and I never saw a real Gepard open up like that...again I suspect it's for RC stuff)
--my goodness, so much sanding...

After all the above was complete, I primed it all with Testors gray rattle can.


Up next will be spraying NATO camo. This is a huge step for me, as my past experiences with airbrushing have been abysmal, to put it mildly 5 years later, here's hoping that with age comes talent!
GaryKato
Visit this Community
California, United States
Joined: December 06, 2004
KitMaker: 3,694 posts
Armorama: 2,693 posts
Posted: Tuesday, November 28, 2017 - 06:05 AM UTC
Good first steps on getting back to the hobby!

I am constantly laying off building then coming back. Each time I have to buy a new tube of putty and a new bottle of CA glue.Some of my paints have held up well, some have not.
Pave-Hawk
Visit this Community
Western Australia, Australia
Joined: May 05, 2006
KitMaker: 900 posts
Armorama: 510 posts
Posted: Tuesday, November 28, 2017 - 07:29 AM UTC
Chevy is closer to being finished, and I am in the process of acquiring some replacement jerry cans for the jeeps so hopefully I might just scrape in at least one finished model before the deadline.
Buckeye198
Visit this Community
Ohio, United States
Joined: May 02, 2010
KitMaker: 596 posts
Armorama: 265 posts
Posted: Thursday, November 30, 2017 - 05:57 AM UTC
Quick update here. Sprayed the road wheels with excellent results (again, I've never had good luck with airbrushing, so this is big for me). Only had to touch up three or four wheels, and the ones that did need touching up were very minor.


Everything got a base coat of green, then I began experimenting with blue tack on the turret. The stuff worked very well for me, another skill added to the mix! However, the brown paint that I used was too dark. Try to make out the brown splotches from the black ones.


In addition to being the wrong color, the paint itself didn't seem to dry evenly and it came out very messy looking (marketed as a "concentrated water color" instead of an acrylic so maybe that has something to do with it). I got a different paint (same brand as the green, which worked very well...FW Acrylic Artists Ink) in a redder hue, remasked the turret, and sprayed over the bad brown. This was the result:


Numerous coats didn't make a difference. I didn't want to drown the sucker in paint (like I usually would do), so I put down a coat of black which covered everything very evenly and looked nice. But then further applications of the red-brown turned out exactly like before. I don't get why it would look perfectly smooth under black coats, but then show up again when the red-brown was put on top. Wouldn't the base coats neutralize what's underneath?

Theory aside, what do I do now to fix this?
SGTJKJ
#041
Visit this Community
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Thursday, November 30, 2017 - 03:31 PM UTC
Robby, that is weird. I have never seen that before. Hopefully somebody in here knows what is going on.

Hope a solution can be found.
Charlie-66
#186
Visit this Community
Texas, United States
Joined: May 24, 2006
KitMaker: 771 posts
Armorama: 750 posts
Posted: Thursday, November 30, 2017 - 09:09 PM UTC
Well, late to the dance, but that's been the story of 2017 for me! Stopped work on this one because I didn't like the fit of the upper hull/fighting compartment to the hull, and the fit of the vehicle roof to the fighting compartment. As I look through what's left to do I wonder why I lost interest so close to being done!

supplyssg
Visit this Community
Connecticut, United States
Joined: February 04, 2003
KitMaker: 82 posts
Armorama: 71 posts
Posted: Friday, December 01, 2017 - 05:40 AM UTC
Tamiya, 3T Cgo Trk (Opel Blitz), 1/35

Hi all, some interesting entries still arriving.
Just a quick update on the Blitz project. Recently got down a base coat of Tamiya German Grey, thinned down well and even added a little Tamiya Paint Retarder. Now, as much as tried to apply light thin coats very patiently to allow the black and white primer to come through, I still ended up with a heavy application and much of the effect was lost... Oh well, live and learn. My first major Tamiya paint application was a success otherwise and I followed up with a lighter airbrushed highlight subsequently which provided the look I was after. What I was really impressed with was the Mig blue filter I applied the next day. It makes all the difference in the world and really takes that German Grey/Blue to a whole new level. It has a very realistic look, at least to my eye.







Decals are a combination of homemade stencils as pictured below, dry transfers and waterslides to come up with the unit I wished to represent during the 1939 Poland Campaign. Researching early LKW's both pre-war and early war revealed lots of different variations and many overly large "not so tactical" tactical symbols which I tried to replicate on the tailgate, which I'm pretty happy with.



DocEvan
Visit this Community
California, United States
Joined: August 09, 2014
KitMaker: 180 posts
Armorama: 180 posts
Posted: Friday, December 01, 2017 - 05:47 AM UTC
Here's what I'm working on, going into 12/17:

Mirror Models CAT D7. Will represent a USN Seabees dozer. My father-in-law was in the Seabees during WWII.


Complete left side. Colors are various rust acrylics = dark brown/roof red. I will add pastels or weathering powders once the mode is complete. The contrast from the Navy Grey is stark. But we'll fix that. And yes, I know that there's a lean in the exhaust pipe.


The exaggerated sag in the upper part of the treads was due to having one extra link!! I didn't realize this until they were all glued on I compared the correct left side with the right.
Luckily, I was able to pry off the treads and remove the offending extra, and get all the remainders back on properly.
Now working on the blade and rear winch assemblies.

supplyssg
Visit this Community
Connecticut, United States
Joined: February 04, 2003
KitMaker: 82 posts
Armorama: 71 posts
Posted: Saturday, December 02, 2017 - 02:09 AM UTC
So looking forward to your progress on this little gem, Doc! Eyeballed this one on a news review and thought it was a cool little piece. Perfect SeaBees subject. Be sure to keep us posted.
Never built a Mirror Models. What's your opinion? I've been lusting over their Canadian CMP trucks for a possible North African Italian capture version. On my radar, but haven't popped yet.
Pave-Hawk
Visit this Community
Western Australia, Australia
Joined: May 05, 2006
KitMaker: 900 posts
Armorama: 510 posts
Posted: Thursday, December 07, 2017 - 04:46 AM UTC
So the Jeeps are nearing completion, having replaced the kit jerry cans with some academy ones, mostly German.



The bonnet mounted jerry cans are missing the straps that came moulded on the kit cans, so I made some buckles.
Removed by original poster on 12/08/17 - 07:13:12 (GMT).
GaryKato
Visit this Community
California, United States
Joined: December 06, 2004
KitMaker: 3,694 posts
Armorama: 2,693 posts
Posted: Monday, December 11, 2017 - 01:08 AM UTC
20 days to go!

I probably won't make it but there's always next year! There probably won't be extensions like in other campaigns since your unfinished build still qualifies for next years.
Scipio2010
#401
Visit this Community
Washington, United States
Joined: December 08, 2013
KitMaker: 323 posts
Armorama: 221 posts
Posted: Monday, December 11, 2017 - 05:59 AM UTC
I think the Cheetah is done. Decided to go light on the weathering, any comments/critiques welcome.







Robbd01
#323
Visit this Community
Arizona, United States
Joined: February 13, 2013
KitMaker: 791 posts
Armorama: 344 posts
Posted: Monday, December 11, 2017 - 06:21 AM UTC
Looks like no Unfinished Builds being completed this year. My water heater busted and got my man cave all soggy wet. It is all being repaired and there is no way I will get anything done in time to earn my ribbon. Well at least this year I can't blame it on my procrastination. Just for prosperity I might do a group shot pic of all those projects - oh so close - not getting finished this year.

Cheers and grats on all those that got something done.

jldurand
Visit this Community
Quebec, Canada
Joined: July 06, 2013
KitMaker: 225 posts
Armorama: 215 posts
Posted: Wednesday, December 13, 2017 - 10:47 AM UTC
This URAL has been completely destroyed when I moved to Canada. So I bought a PE set from Magic Models, trying to do something interesting.


GaryKato
Visit this Community
California, United States
Joined: December 06, 2004
KitMaker: 3,694 posts
Armorama: 2,693 posts
Posted: Wednesday, December 13, 2017 - 08:07 PM UTC
Done
------
69mudbone - Trumpeter 1/72 'Small Turret' KV-1
AgentG - Tamiya M60A1
Blade48mrd - Tamiya 1/35 Tiger I (Mid), Tamiya 1/35 Panzer III DAK, Tamiya 1/35 Tiger II (Porsche)
Cam - DML Sherman III
Chapman - Hobby Boss 4.7cm Pak(t) auf R 731(f)
erichvon - Opel Blitz
Erik67 - Revell Leopard 1A5NO
jimb - Dodge Charger (Florida Highway Patrol)
MLD - MaK Meng Toyota Pickup Technical, Gans 'Battlefrog'
Scipio2010 - Amusing Hobby 1/35 VK 30.02 converted to a Sd.Kfz. 172 Cheetah
SGTJKJ -Dust Tactics Walkers
SKiernan - Tamiya M4A1
Zhivago - Heller 1/72 Amiot 143


Less than 3 weeks to go!
jldurand
Visit this Community
Quebec, Canada
Joined: July 06, 2013
KitMaker: 225 posts
Armorama: 215 posts
Posted: Wednesday, December 13, 2017 - 08:45 PM UTC
[quote]I think the Cheetah is done. Decided to go light on the weathering, any comments/critiques welcome.

It's OK with light weathering. When tanks are recently painted, they don't look like old rusty abandoned vehicles !!! I like the way you worked on colours and the subtil effects.
Buckeye198
Visit this Community
Ohio, United States
Joined: May 02, 2010
KitMaker: 596 posts
Armorama: 265 posts
Posted: Thursday, December 14, 2017 - 06:48 PM UTC
Shawn: the Cheetah looks excellent, no complaints about light weathering. Especially since my entry has basically zero weathering...but I'm gonna call my entry done too!

I ended up stripping the brown paint down to the primer and respraying those areas. The new brown paint covered evenly, no more complaints. And yes, I intentionally picked a red-brown instead of the NATO standard...I saw a few pics of Bundeswehr vehicles with that hue, the model isn't 100% accurate already, and I liked the look of it and it's my model


I dusted the model with diluted brown. The picture compares the dusted hull with the undusted turret.


As a final detail, I painted the track pads black. I was very surprised how much of a difference it made on the rubber band tracks. Bottom track is fully painted, top track is starting to be painted (towards picture right).


Final assembly. I added the weight patties inside the hull, applied decals and the usual flat coat finishing, then mated the turret and hull. Everything is still movable, save for the instrument cabinet in the rear.








I'm going to keep the autocannons trained slightly skyward. Partly because it gives a bit of drama to the model, but also because I didn't shave the joints enough so they scrape some of the paint off the turret. Easier to just cover up the scrapes through posing.


Every model has a good side...everything went wrong on the right and right on the left. So this will be my final display view for my Flakpanzer Gepard. A straightforward build, lots of opportunity for fun modifications, and finally a coat of paint five years later (almost to the day)! I'm very pleased with my second attempt at airbrushing. Any advice of course is welcome.
jldurand
Visit this Community
Quebec, Canada
Joined: July 06, 2013
KitMaker: 225 posts
Armorama: 215 posts
Posted: Thursday, December 14, 2017 - 07:23 PM UTC
This is a very clean build and painting. I am usually not fan of modern tanks but yours is really nicely done.