login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Constructive Feedback
For in-progress or completed build photos. Give and get contructive feedback!
Tasca M4A1 Grizzly Guardian
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Friday, April 20, 2018 - 06:29 AM UTC
I am probably not going to do the cobra king, was thinking of trying my hand at some shell damage on the frontal armor of the jumbo. Still only a project in the back of my mind, with the kit on the shelf. I also have an E8 sitting next to it... surprise there huh? Might even get crazy and do a dio with the jumbo and an E8 and maybe a destroyed german AT gun that lost the duel with the jumbo... who knows.

It is funny, looking at those pics the first thing that went through my head as that they stole your stand. Though yours is just a touch more classy. Tell em if they keep stealing your stuff they will have to deal with an angry snuggles..
panamadan
Visit this Community
Minnesota, United States
Joined: July 20, 2004
KitMaker: 853 posts
Armorama: 797 posts
Posted: Wednesday, April 18, 2018 - 11:25 AM UTC
The first photo of the Jumbo is taken at Camp Ripley, MN-I was slightly involved with it's restoration.
What a beast.
Dan
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Wednesday, April 18, 2018 - 09:42 AM UTC

Quoted Text

I do have a tasca jumbo on the short list



Did someone mention Mr Jumbo...


A very nice picture, but badly cropped, that's not my fault, and why is a pick up truck on display next to a tank? only this could happen in America,..lol



Picture above, for a guess you're gonna have a go at this maybe? Good old Cobra King, a good picture because it shows that sometimes it is realistic to have the first road wheel sitting up/pressed up high, it does kinda depend on the terrain that the tank is sitting on, as in this example maybe, plus there is a lot of extra weight over the front on a Jumbo with all the added armour plates and the massively thickened FDA.



Picture above, rear bogie - angled suspension arms, middle bogie - slightly angled suspension arms, front bogie - flat suspension arms, maybe due to the extra weight putting pressure on old tired suspension, or they were like that when they rolled of the production line, but anyway...

They're copying my stand! The b**tards, everyone steals my work...


Matt
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Monday, April 16, 2018 - 12:09 PM UTC
Making a Stand (part one)

This I suppose could be described as very basic scratch building, or basic model making even, it does kinda depend on your views, and it has to be said that there is nothing hard or complicated about any of this, it's just cutting card, cleaning up edges and making things look nice and clean, no pencil marks, no rough edges, basic clean n tidy construction, and if you f**k it up, well it doesn't matter, so it's perfect practice for anyone who is thinking about doing some scratch building for the first time, or who has maybe just done a bit and needs more practice (and yes, that includes me)

Picture below left, the base, this is thick plastic card (2mm) with the corners cut off and two 'I' beams stuck to it, these are to act as rails, the angled corners keep things looking clean, picture below right, two planks of card (1.5mm) one with the corners cut off, and one with horrible pointy corners, If you don't need pointy corners, then cut them off, or round them off, it will always make things look a million times better.



Pictures above, next 'T' grooves (slots) are added so that the planks will just slide on and off the 'I' beams, why do it like this? Well, because 'reasons' that's why, this is simply done with plastic strips of different sizes , first 1.0x2.0mm and then 0.4x4.0mm layered on top, the top layer needs to be thin and bendy so that it will grip the underside of the 'I' beam which has an angled edge, and what we end up with is a plank of card that will slide on and off our rails.


Acorn Antiques (a UK only ref, sorry)


The PE tread plate is from Accurate Armour - https://accurate-armour.com/

Now PE tread plate needs to be added, this is a 4 bar type cut from a fairly big sheet, and it comes as new in a horrible looking golden colour which I really can't stand , so it needs to be given a nice 'antique' kinda look, first both strips are heated to cherry red then left to cool, this burns the surface which will then gain contrast, and removes the tension (springiness) from the metal, then we do the following -

1. Clean with rough wire wool and Jif, removes all the harshness from the tread plate, and makes one hell of a mess
2. Clean with fine wire wool and Jif, and washed with hot soapy water.
3. Polish with fine wire wool and Autosol metal polish, wash with hot soapy water.
4. Polish with a soft cloth and Autosol metal polish, another wash.

Picture above right and below, after all that messing around you get nice 'antique' looking PE tread plates that don't have that harsh new look, it's a lot of messing around just to slightly change the appearance of the metal, but I much prefer it looking this way.



Picture above, The PE tread plate is glued to the plastic planks with epoxy resin and left to set for an hour or two, the edges are then sealed with CA applied with thin wire, and this is important because the edges need to be dressed (that's dressed as in cleaned up, sanded, not put your socks on) If you don't seal down the edges then you will have one hell of a game dressing them, both sides are dressed with various grades of sandpaper glued to metal blocks (my metal squares)



Picture above left, the edges are then faced with 2.5mm angle strip, this covers the bare metal edge which is very
important, unless you fancy slicing your fingers open on bare metal edges, and they also sit just slightly proud of the tread plate which provides a nice visual effect, picture above right, then four little end caps/plates are added to seal in the ends of the tread plate and finish everything off, then simply slide the two planks onto the 'I' beams and it's job done, for now.



And after all that nonsense I have a simple, functional and clean looking stand for the Grizzly to sit on, and just like everything in this god damn build log it's not finished yet, it will be getting further work as time goes on, as and when I can be bothered to work on it, a bolt head theme will be developing I think.


Anyway,

Spring has sprung, updates will be very erratic and much shorter in length (probably a good thing) from this point onwards, I have gardening to do.


Kharkov - "Enya,..Snuggles?"
Snuggles - "One for the oldies Dad!"
Kharkov - "We are the 'oldies' now, Snuggles."
Snuggles - "Well then, words for the wise,..Dad"
Kharkov - "The more you have, the more you want?"
Snuggles - "And the more you want."
Kharkov - "The less you have."







Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Thursday, April 12, 2018 - 04:44 PM UTC
Yes that video puts 1/35th into perspective, it clearly shows me and my failing eyes that I need a 1 to 1 scale E8... then my old back says "stick with the plastic stupid or I will go out" and the wife agrees.. oh well they get horrid gas mileage any way.

I do have a tasca jumbo on the short list so I will look at the way you both did the suspension and then screw mine up accordingly.
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Monday, April 09, 2018 - 02:58 PM UTC
Tasca Bogies (Handy hints and tips)

For anyone who might be currently working on some Tasca VVSS bogie units, complete with their foam based 'working' suspension system, here is a very good video by Paul Budzik, who it has to be said is a very talented model maker who goes out of his way to be very helpful with regards to hints and tips when building Sherman kits, mainly Dragon kits, but also Tasca and Tamiya related stuff.



He shows a much better way to do the foam pads that form Tasca's 'working' suspension, which is highly recommended, Tasca's foam pads are not brilliant to be honest, he also suggests the very same thing that I did with mine (back on page 4) which is to simply junk the foam and replace it with plastic card to in effect just forget about that 'working' nonsense and lock everything in place.

He also shows another way to put your wheels, suspension arms and return rollers in after the bogie unit has been glued together, it involves trimming back the locator stubs (and cutting them back at an angle) so that the parts can be kinda squeezed in afterwards, it can result in things being a little bit wibbly wobbly if you're not careful with the cutting, but it's another option, and a damn site easier than mine.

Paul Budzik - http://paulbudzik.com/index.html


VVSS Assembly (The real deal)

We spend so much time working in our good old 1/35th scale it's easy to forget just how big some of the parts are that go to make up a real Sherman bogie assembly, so here's a nice little video showing two guys putting one back together after the parts have been restored, the restoration is by the Museum of the American G.I. in College Station, Texas.



Kinda puts model making into perspective, lol




Matt
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Sunday, April 08, 2018 - 03:46 PM UTC

Quoted Text

I am still ogling that cast hull... just speaks to me



Well, you will be seeing a lot more of it later as it needs a little modification, more detail, and more stuff to go on it.

The plan is to use metal tracks yes, not many options track wise, they will hopefully be pinned together with steel or brass pins to keep them tight(ish) and the jig/stand thing is currently morphing into something else, and that is the next post




Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Sunday, April 08, 2018 - 03:20 PM UTC
Looks like progress.. I am still ogling that cast hull... just speaks to me. I did expect the jig for the boogies to have some sort of addition to check the wheel.spacing... not that it is needed. Are you really going to use metal tracks??
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Sunday, April 08, 2018 - 08:40 AM UTC


Kharkov - "The Cage? Snuggles?"
Snuggles - "Hidden tracks Dad, tucked away at the end."
Kharkov - "A lesser travelled path? Snuggles?"
Snuggles - "Not so much a path, just a better way."
Kharkov - "You can't change the past Snuggles."
Snuggles - "Then why do you try?"





Matt
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Sunday, April 08, 2018 - 08:37 AM UTC


Picture above, Robin Hood is another fairly famous M4A1 Grizzly which is located at the Nationaal Bevrijdingsmuseum 1944-1945, in the Netherlands, and is part of the Sherwood Rangers Yeomanry (Nottinghamshire Yeomanry) Memorial, this Grizzly has had a fairly adventurous history as she served with the Portuguese Army for a period of time before ending up back in the UK to be restored, I'm not sure who did the restoration (Bovington Tank Museum maybe?) and then finally shipped over to the Netherlands, the name Robin Hood comes from the Nottinghamshire Yeomanry Regimental HQ tanks.


Clementine

The first of many boring jobs was to clean up all the wheels and suspension arms (picture below) On the real thing all of the suspension parts are cast items, so you don't really want any harsh sharp edges I don't think, it all comes down to personal preference on how you prep plastic parts, me personally I can't stand harsh edges or seam lines on anything really, even if it is accurate, but anyway, the tyres have simply been scraped with a knife blade, another boring repetitive job.



Next job (picture above left) was to clean up, modify and fit all of the little rocker arms, these would normally be fitted when you glue the two halves of the Tasca bogie units together, because they locate on a bar which is up inside the bogie unit, but I didn't want these flapping around while I was doing modifications to the bogie ribs, so decided to convert them to clip on, this simply involved cutting out the top portion, but leaving enough plastic so that they in effect clip into place, as shown in the pictures.

Last job (picture above right) was to make a whole bunch of new spindle tubes to fit my brass spindles, these are made from plastic tube, spun in a Minicraft tool to achieve square ends, and drilled to be a tight fit on the spindles, you can drill out the standard Tasca spindle tubes, but you will be left with wafer thin plastic, and if you drill even slightly out of square and true you will be in big trouble. again all of this lot would normally be fitted when the bogies are glued together.





Pictures above, I have wheels on my wagon at long last, my spindle tubes are a little bigger than the Tasca ones, but it doesn't matter as you can hardly see them, and this way it all works out with the bogie assembly being a lot stronger, which is important as the model is getting handled a lot and will be getting metal tracks, at some point, It also took me forever to choose which wheels to use, I really couldn't decide, but welded spoke wheels is probably the better choice.


Anyway,

Kharkov - "Clementine? Snuggles?"
Snuggles - "I wish I was a little more,..delicate, Dad."
Kharkov - "So what have you broken now? Snuggles?"
Snuggles - "Broken,..that's,..such a harsh word."
Kharkov - "No, Snuggles, It's the correct word."
Snuggles - "It wasn't my fault Dad!"
Kharkov - "It never is."



Snuggles - "Fifty I'm gonna change my minds."





Matt
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Sunday, April 08, 2018 - 03:07 AM UTC

Quoted Text

Now tracks and that turret you are putting off... or are you waiting on snuggles to finish that one?



Wheels and tracks is gonna take a bit of time, there's a fair bit to do, including scratching some idler wheel mounts, I decided to go back and start from the ground up just in case of any bogie placement problems or track alignment problems, and I'm running ahead of the build log, so I already know the answers to that lot

The turret is waiting for me to decide what will be scratch built, there's one particular thing I want to make, it's an easy enough shape to make, but requires some very delicate placement of some very small screw heads, so still working things out, and getting things I need, so the turret will be done later, hopefully with some scratch stuff, kinda all depends on time.



Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Friday, April 06, 2018 - 02:32 PM UTC
Glad to hear you did not need snuggles boat. And for the record you brits have the best tea.
Shipment is scheduled for Monday morning, so we get to see if it all made it or not.

Looking good, I am going to steal the method of dealing with white metal. Thanks.
Looks like the hull is pretty much wrapped up, road wheels almost.. now tracks and that turret you are putting off... or are you waiting on snuggles to finish that one?
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Thursday, April 05, 2018 - 12:17 PM UTC

Quoted Text

The rain. Let up or is snugget swimming??



We were swimming for a bit, ok now though, lol typical Englishman, all we do is drink tea and moan about the weather...

Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Thursday, April 05, 2018 - 11:32 AM UTC
Wheels and Sprockets

Tasca/Asuka provide two sets of wheels in both their mid production and late production M4A1 Sherman kits, which is good, it gives you a choice, and it gives you a spare set of Sherman wheels all at the same time, they give you the early welded spoke wheels and the later pressed/stamped spoke wheels, both types can be seen on the M4A1 Grizzly, but I think it's fair to say that the early welded spoke wheels are more common.



Pictures above, these are the wheels provided by Tasca, which are very good it has to be said, the welded spoke wheels have some very subtle welding down in all the corners, and they have the two grease nipples as well, the pressed spoke wheels just need the little rivets adding on the inner face of the rim, and Tasca provide these in the kit, or you can use your own.



Picture above, quite a few examples also show a mix of both types of wheel as well, so that's another option, I'm not keen on the mixed wheel look though to be honest, I would much rather just use one set and then keep the other set for spares.


Drive Sprocket



There seems to be two types of drive sprocket for the Grizzly, one without an extra set of mounting holes (left picture) and one with the extra set of mounting holes, not sure on this though, the one on the left could be a post war period sprocket that's been made by an engineering firm? And they just didn't bother with the extra set of holes, not sure, I'll have a look at some Sexton pictures, that will probably explain things.



Pictures above, the white metal sprockets provided by Friul have the extra set of holes and are very nice, they need quite a bit of clean up (white metal parts always do) and the outer set of bolt heads, marked by the red arrow, are a little bit vague and will hopefully be replaced by MasterClub resin bolt heads.

The sprocket on the left has been cleaned up (obv) and polished slightly with very fine wire wool and Autosol metal polish, this takes away the horrible white metal look, and gives it a much nicer steel kinda look, these sprockets also need to be spaced correctly for the track, more on that later.

Next post will hopefully have some actual model making in it, I'm just splitting things down a bit.




Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Wednesday, April 04, 2018 - 08:47 PM UTC
How about a cat with an eye patch??? No.... come on.

Shipper says my stuff has cleared customs and should be delivered in the next few days... now let's hope it's all there and not destoyed..

The rain. Let up or is snugget swimming??
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Tuesday, April 03, 2018 - 08:28 PM UTC

Quoted Text

I am starting to worry about pirates.



I draw the line at posting pictures of cats in pirate hats, lol.



Matt
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Sunday, April 01, 2018 - 11:32 AM UTC

See how sensible the above picture is, it's almost kinda posh looking, there's no growling snarling bear, no drama, no fuss, the picture was going to be my build log starting picture, that is until I junked it, because I thought it was a little,..on the boring side of life, lacking in impact, that kinda thing, see, I can be sensible,..sometimes.


The Sensible Way

Well, everything up to this point in the build log could be considered doing things the hard way, the stupid way, the overly complicated way or the fun way, it's up to you, so take your pick, but there's also another way to get to this exact same point in the build, and I suppose it could be called the sensible way or maybe the easy way, it's a lot less complicated and it involves far less time, but it does have a few downsides, it involves running a lottery with the resin guys, because you never quite know the quality of the resin until it arrives on the doorstep, and it involves a credit card, as always.


For Those Who Refuse to Count... ('friendly' or otherwise)

For people who really don't care about any of the detail on the underside of a Sherman M4A1 welded hull, and let's face it, most of us don't, including me most of the time, well it's kinda easy, you just take the standard Tasca riveted hull and convert it into a welded hull by simply shaving off a few rivet heads on just the sides of the hull, there's not even that many of them (about 84 I think) It's that easy, as the picture below shows, simply remove the lines of rivets as shown by the arrows, then forget about the hull bottom, because you can't see it anyway, and you have a welded hull.




And,

For Those Who Like to Count... ('friendly' or otherwise)

For people who are a little more concerned with all the detail, even all the stuff that can't be seen, i.e. all the detail on the underside of the hull, well, things are a little harder, first you need to remove all the rivets, a lot more than 84 (I'm not gonna mark them all out, you know the deal) plus, you need to rework the two cross beams/strengthening beams marked with the two arrows in the picture below, these need to be more triangular in shape with spot welds down both sides, the Tasca beams have flats because they are designed to be riveted on with huge rivets (obv) then a few other changes are needed, there's more info on all of that stuff way back on page one, which is where this post should be, but never mind.




A Resin Hull

With the upper hull, there are a few options, you can use the Tasca upper hull without any applique armour, either cast-in or welded on, the Bovington Grizzly for instance has no additional armour on the upper hull, you could make your own welded on applique armour plates and stick them on the Tasca hull, or you can just buy a resin upper hull with cast-in applique armour as shown in the picture below, this one is made by Panzer Art and looks very nice to be honest, I think Formations might also have one as well, but not sure on that, but there are resin options if you want to go that route.




Resicast Bogies

Not so many options with regards to the Sexton 'big rib' bogies unfortunately, Resicast make three sets of bogies which are designed for the Dragon Sexton kits, but can be used for a Grizzly build, they are designed to fit the Dragon hull but they could be modified slightly to fit the Tasca hull, I bought a set just to have a look at them, to see what they are like (picture below) they seem fairly good, they need a bit of a clean up and filling where the pour plug is, nothing major, on my set the return rollers are a little bit iffy, but not a problem, you could simply snip them out and replace them with the kit return rollers, brass, plastic rod/tube, whatever.



The bogies in the Dragon Sexton kit don't seem to be that good, well, not as good as these Resicast ones anyway, let's put it that way, though I've only managed to find one picture of them online, so kinda hard to tell, but I don't think it's worth it to buy a Dragon Sexton kit simply to steal the CDP tracks and Sprocket plus the 'updated' big rib bogies, not when you can simply buy the Friulmodel track set which comes with sprockets, and then get some resin bogies, all the Sexton parts wouldn't be much use to me as spares, but they might be for you.


Anyway,

You could probably knock all that lot up in a couple of weekends, kinda depends on how you work, available time, all that stuff, but it would be a lot faster than all my messing around with silly little bits of white plastic, but would it be more fun? I suppose that kinda depends on how you obtain fun, if you just want to get on with the job, get to the paint stage as fast as possible, then this is probably the better way.

But what about muh FDA? Just use the Tasca item, it's perfectly fine, I was just being a drama queen...


Kharkov - "Snuggles, how many rivets need to be removed?"
Snuggles - "F**k that Dad! I'm not counting all those rivets."
Kharkov - "I thought you were always 'happy to help' Snuggles?"
Snuggles - "I'm happy Dad, just,..not that happy."
Kharkov - "Have you seen the rain? Snuggles?"
Snuggles - "I'm making a boat Dad! As we speak."
Kharkov - "Yeah, in 1/35th scale,..idiot!"
Snuggles - "Do we live on a hill?"
Kharkov - "You ever go outside?"



Snuggles - "I know a cat called Noah,..is that any help?"




Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Saturday, March 31, 2018 - 05:36 AM UTC
Tell Snuggles that is what a life of drug use gets you.. Still no word on my shipment, I am starting to worry about pirates.
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Thursday, March 29, 2018 - 03:48 PM UTC
Russ, Good timing on my part then, nothing worse than god damn paperwork.


Easy

Quoted Text

If my stuff comes up missing I am shipping 5 kilos of cat nip to snuggles...



Snuggles was spotted out by the fence the other day, with next doors cat...



Snuggles got the bum end of the deal...lol




Matt
rfbaer
Visit this Community
Texas, United States
Joined: June 12, 2007
KitMaker: 1,677 posts
Armorama: 1,529 posts
Posted: Thursday, March 29, 2018 - 01:45 PM UTC
This was a welcome break after working through most of my end-of-month mileage entries.
Thanks Matt.
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Thursday, March 29, 2018 - 10:52 AM UTC


Revenge of the Bogie Man

Well, people with a keen eye for spotting my laziness will have probably noticed that only one of my Tasca bogies was ever modified with the little side plates that blend in the larger bogie ribs, so in all the pictures that I keep posting my bogies don't kinda look right, so I decided to sort that out and do some more work on them.

Pictures below, first the remaining five bogies were attacked with a Minicraft tool fitted with a teeny tiny square head cutting bur to cut out the holes that are characteristic of these types of bogies, then some very thin plastic strips (0.4mm x 6mm) were cut to a vague size and glued in place (the edges need to be angled correctly first) Then everything simply gets carved to shape with a knife, Miliput needs to be added to the front corner/angle to further blend things in, but that can wait.



Pictures below, my 'mid' return skids have been glued in place at long last, I got fed up with these rattling around in an old Tasca lower hull on my shelf, these are probably not that correct for a late cast-in applique armour Grizzly, but I prefer them to the more usual late 'up and over' return skids, they just look a bit different, so I'm using them.




Who Invented the Wheel?

And now due to my ever worrying mind, we have to go downwards, instead of upwards, and fit all the wheels, suspension arms and drive sprockets, there's a few things that are still bothering me with regards to the bogies, and the only way to find out is to fit everything and have a look, normally sorting out this lot (picture below) would be fairly easy, but like an idiot I've made it hard for myself by converting my Tasca bogies so that everything can be fitted later...



All the wing shaped struts need to have the tops clipped out so that they click into the bogie units, and all the suspension struts need to be converted so that they fit onto my little brass spindles, plus the Tasca wheel spindles need sorting, they have a step on them which means the wheels are a little wibbly wobbly, which I don't like.

Anyway,

Where's the turret? The turret can bloody wait, I've got other things to worry about right now...


Snuggles - "Dad! There's a man outside!"
Kharkov - "In a long coat, grey hair,..smoking a cigarette?"
Snuggles - "That's uncanny Dad! How did you know?"
Kharkov - "Let's just call it,..a sixth sense, Snuggles."
Snuggles - "You know, I hate to ask Dad, but..."
Kharkov - "Are friends electric? Snuggles?"
Snuggles - "Have you heard this..."
Kharkov - "Many times."



Snuggles - "Dad!, mine broke down."


Helpful Tip (lol, not) When doing boring model making jobs, try this - go find a song that you like, it needs to be fairly long, non of that 3min nonsense, then stick it on repeat, and listen to it over and over and over, it tricks the brain into regarding repetition as acceptable, works for me, might not work for you...




Matt
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Thursday, March 29, 2018 - 05:48 AM UTC

Quoted Text

Easy

Quoted Text

Then another 10 working days for customs to clear my stuff.



Let's just hope none of those 'customs officials' have a keen interest in military modelling, otherwise some of your stuff could,..errr, maybe, become,..lost luggage, lol




If my stuff comes up missing I am shipping 5 kilos of cat nip to snuggles...
Kharkov
Visit this Community
England - East Midlands, United Kingdom
Joined: April 09, 2011
KitMaker: 863 posts
Armorama: 857 posts
Posted: Tuesday, March 27, 2018 - 07:45 AM UTC
Easy

Quoted Text

Then another 10 working days for customs to clear my stuff.



Let's just hope none of those 'customs officials' have a keen interest in military modelling, otherwise some of your stuff could,..errr, maybe, become,..lost luggage, lol


Russ

Quoted Text

I've confirmed something, and it's your fault, Matt."



Feel free to blame me for everything, I don't mind, but did you have fun adding all that detail in an area that can't be seen? It kinda makes your head go round and round in circles with that old 'does not compute' error message - But it can't be seen!? But I know it's there, so I'm gonna add it!! But it can't be seen!? But I know it's there God damn it!! But it can't be seen, by anyone?! I'm adding it, and that's the end of the matter! But, why? Why would you add something, that can't be...

Very much like arguing with a good woman...

No offence intended to any women who might be reading the build log (better safe than sorry)



Matt

Edit @Russ, I dropped on over for a look at the build, that's a very nice build you got going on, It's all looking very good, I love the chair on top!
rfbaer
Visit this Community
Texas, United States
Joined: June 12, 2007
KitMaker: 1,677 posts
Armorama: 1,529 posts
Posted: Monday, March 26, 2018 - 12:27 PM UTC
It looks tankish!
On a side note, I've confirmed something, and it's your fault, Matt. I spent a good half hour today, adding retaining brackets and bolts to some IDF Blazer armor on a Magach today, in places that will be hidden with the turret mounted.
I wallow in it.
M4A3E8Easy8
Visit this Community
Washington, United States
Joined: February 04, 2006
KitMaker: 264 posts
Armorama: 263 posts
Posted: Monday, March 26, 2018 - 05:59 AM UTC
Lists... got to love em. I make em up, ignore them, untill I think I am done the find out I missed a few things. Then you have to decide how much you want to undo to do what you wanted to do.
I just found out my slow boat docks in two days.. Then another 10 working days for customs to clear my stuff, another 3 to 5 days to deliver... so should be just before xmas that I get my stuff.