login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Live Resin [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
M2 .50 Cal Ammo Belts
M2 Browning .50 Caliber Machine Gun ammo belts set
  • move

by: Mario Matijasic [ MAKI ]

Introduction:

An ammunition belt is a device used to retain and feed cartridges into a machine gun. Belt-fed systems minimize the proportional weight of the ammunition to the feeding device along with allowing high rates of continuous fire. Belts were originally composed of canvas or cloth, however those designs were prone to malfunctions. Later belts used permanently connected metal links to retain the cartridges during feeding. Modern ammunition belts use disintegrating links. Disintegrating links retain a single round and are articulated with the round ahead of it in the belt. When the round ahead is stripped from the belt and fed into the feed system or chamber, the link holding it is ejected and the link holding the following round is disarticulated.

The .50 Browning Machine Gun (.50 BMG) or 12.7x99mm NATO is a cartridge developed for the M2 Browning .50 Caliber Machine Gun. It was adopted by the US Army in the 1920s, and has been in continuous service ever since. There are more than 20 types of ammunition issued for use in the M2 Browning, color coded on the tip to enable identification of rounds. The ammunition is fed to the machine gun linked with the M2 or M9 metallic links in disintegrating belts.

Review:

The M2 Browning .50 Caliber Machine Gun ammo belts set (LRE-35053) comes packed in a zip-lock bag with the resin pieces additionally protected between a firm cardboard. The CAD boxart picture on the front shows all the kit parts, while the one on the back displays some of the possibilities of using this set. The box states this accessory set is compatible with all Live Resin kits featuring M2 machine guns, but also with any .50 caliber machine gun produced by other manufacturers.

The kit includes 4 different size .50 cal ammo belts: 52-round (4x), 28-round, 14-round, and 10-round belts. The longest belt is depicted completely straight, while the shorter belts are slightly bent. The parts are cast in grey resin. Besides some tiny flash residues, the casting is perfect.

The boxart picture displays the possibilities of using the short ammo belts from this set, each belt enumerated for easier recognition: the 10-round belt is designed to represent ammo feed belt going from the ammo can in Mk93 Ammo Can Holder to the M2 machine gun receiver, the 14-round belt depicts ammo feed belt going from the ammo can in Mk93 Multi-Purpose Ammo Can Holder to the M2 machine gun receiver, while the 28-round belt represents the ammo hanging from the weapon receiver. The longest belt can be used as is or trimmed to fit inside an ammo can. Additionally this belt can be bent, twisted, angled or similarly modified using hot water. Caution and a lot of patience is necessary to get optimal results.

The ammo belts look really good and the details on both the ammo rounds and belt links are masterfully executed in 1/35 scale.

Conclusion:

Need more ammo for your 1/35 scale .50 caliber machine guns? This set includes .50 cal ammo belts in different sizes, some even slightly bent to depict different ammo feed options. The casting is perfect and the details are impressively rendered. With some additional ammo cans, spent .50 cal shells and belt links available separately from Live Resin, is there anything more to ask for accessorizing the M2 weapon system?

References:

Wikipedia
Olive Drab website
Gary's Olive Drab page
SUMMARY
Highs: Perfectly cast and featuring impressive details, these .50 cal ammo belts are supplied in different sizes and designed to depict several ammo feed options.
Lows: None.
Verdict: Highly recommended.
Percentage Rating
95%
  Scale: 1:35
  Mfg. ID: LRE-35053
  Related Link: Live Resin website
  PUBLISHED: Sep 17, 2013
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 93.37%
  MAKER/PUBLISHER: 93.95%

Our Thanks to Live Resin!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Mario Matijasic (Maki)
FROM: CROATIA HRVATSKA

You wonder how did this addiction start? I was a kid when my dad broght home a 1/72 Concord airplane; we built it together as well as couple of other airplanes after that. This phase was just pure fun: glue, paint, decals in no particular order... everything was finished in a day or two. Then I disc...

Copyright 2017 text by Mario Matijasic [ MAKI ]. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Why did't 100%???
SEP 17, 2013 - 02:35 PM
Mario, Thanks for the review. I have been thinking about getting these but was unsure of the quality. Have to get me a set. Do you know if they make a set for the .30 cal machine gun? Jesse
SEP 18, 2013 - 12:08 PM
Live Resin started with modern day weapons and accessories; they have .50 cal, 7.62x51mm NATO (.308" Winchester), 5,56x45mm NATO (.223" Remington) and 40mm ammo belts. Perhaps you can use Live Resin 7.62mm belts? Historically, the 7.62mm class of cartridge was commonly known as .30 caliber. Mario
SEP 18, 2013 - 12:55 PM
Thanks Mario, I'll take a look.
SEP 18, 2013 - 02:46 PM
All Live Resin belts and feed chutes are very easy flexible after hot water from a teapot. You can easily put in any form
SEP 20, 2013 - 07:25 AM
Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move