login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Plus Model [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
German Fuel Barrels
German Fuel Barrels
  • move

by: Kevin Brant [ SGTRAM ]

Contents

8 - Barrels
8 - Barrel Tops
Parts for one Fuel Pump
1 Fret of Photo-etched Parts


Review

A new set of accessories from Plus Model are German fuel barrels. The barrels are cast in a grey resin with parts for eight barrels. The castings look to be very well done with great looking surface details, including the barrel top and bottom with the embossed markings. The set provides photo-etched parts to create the barrel ribbing as well as the side plug for the barrel.

To ensure the embossing on both ends, Plus Model has provided the barrel in two parts. The casting plug will need to be cut off the bottom, with the provided bottom part provided to glue into place. The raised letting does look very good. For the barrel ribs, strips of photo-etched have been provided that will have to be formed and glued into place, as well as the plug. The photo-etch for the plug will provide a good look for the square slot to remove the plug.

Also included in the set is one hand fuel pump. Unfortunately in my review set, the fine cast parts were broken off, and hard to find in the bag. But with that said, they should easily be reproducible with a couple small lengths of brass wire.

I also found that some of the barrel top and bottom ridges were broken. I believe this is due to having all the parts tightly squeezed into one bag. Also, it might have been nice to include some decals in the set for extra markings.

Overview

Overall this is a great looking set of German barrels from Plus Model. The photo-etched parts for the ribbing and plug should really add to the detail and look of the barrels. The surface details look to be well done, including the embossing on the top and bottom. Unfortunately my review sample did include some broken parts, including the tubes for the fuel pump. I would think this set would make for great accessories for a diorama or stowage on a vehicle, highly recommended.
SUMMARY
Highs: Nice embossing on the top and bottom of barrel, photo-etched parts will add to detail.
Lows: Some broken parts, including barrel ridges and fuel pump parts.
Verdict: Very nice looking set of barrels with nice details, highly recommended.
  Scale: 1:35
  Mfg. ID: 515
  PUBLISHED: May 26, 2018
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 88.35%
  MAKER/PUBLISHER: 85.54%

Our Thanks to Plus Model!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Kevin Brant (SgtRam)
FROM: ONTARIO, CANADA

I am an IT Consultant and father, with a passion for plastic models. I mostly prefer 1/35 Armor and 1/48 Aircraft. My main interests are anything Canadian, as well as WW2 German and British Armor and Aircraft. I have been building models since I was a young kid, got away from it for awhile, but r...

Copyright 2018 text by Kevin Brant [ SGTRAM ]. All rights reserved.



Comments

Thanks for the review Kevin. Given the "I" shape of the ribs, which seems correctly reproduced in photoetch, I guess it is going to be quite hard to wrap it around the barrel... What is your opinion?
MAY 25, 2018 - 09:28 PM
I would agree, but am thinking that it you heat up the photo-etched, it might help.
MAY 26, 2018 - 12:52 AM
I don't think the PE-strips are the complete I. Look at the resin barrels and the rings already in place. Two thirds of the I-profile is already in place, like an inverted T. The groove in the middle of the PE-strips are probably the surface that gets glued to the "foot" of the inverted T. If my guess is correct it is a matter of shaping a flat strip of brass into a circle. The PE-strips could be replaced with strips of styrene if that seems easier to work with. The broken rings worry me more, it will take a lot of work to restore the missing bits of the I-profiles. File down to get a straight line, CA-glue a strip of styrene and then get the whole back to a "perfect" circle ... / Robin
MAY 26, 2018 - 02:02 AM
Always useful, I might be tempted to pick up a few of these for the refueling dio I had long had planned.
MAY 26, 2018 - 02:17 AM
i agree,from the photos it seems that the PE are only the last part of the profile the other part is in resin
MAY 26, 2018 - 04:07 AM
We broke our quick reply box. Working on it. Until fixed go to topic to reply.
Thanks.
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move