login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Live Resin [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

Built Review
135
USMC Soldier for MCTAGS
USMC Soldier Figure for MCTAGS and LAV-25 Turrets (LRM-35006)
  • move

by: Mario Matijasic [ MAKI ]

Introduction:

I remember when the first figures from Live Resin appeared on the market. Back in 2013, these were the first military 1/35 scale miniatures designed using 3D technology and developed by rapid prototyping, revolutionizing the figure production process.

After a long break, Live Resin is back with new 1/35 scale figures. This review covers their USMC Soldier Figure for MCTAGS and LAV-25 Turrets (LRM-35006).

Review:

The set is packed in a hard cardboard box. The CAD image on the box front displays the contents of the set, while the CAD image on the back of the box shows the complete figure. Opening the box, I found a single zip-lock bag containing the pieces of the set organized on several carrier blocks. Cast in grey resin, the pieces look impressive; there are no seam lines, air-bubbles or any kind of imperfections in the resin, only a tiny amount of flash residue easily removed using the back of the X-acto blade. The set consists of 14 pieces:

- legs,
- torso,
- left arm,
- right arm,
- left boot,
- right boot,
- head (2x),
- helmet,
- equipment (5x).

The carrier blocks are large, but feature very thin pour stubs and a small contact area to the piece itself, greatly facilitating the cleanup process. Some extra care is needed when cleaning the delicate ammo belt.

The set depicts USMC soldier in a relaxed posture standing in MCTAGS turret. At first I was a bit reluctant about the pose as it seemed too exposed, but browsing the Internet I found an image which obviously served as a reference photo for designing this figure (attached). The USMC soldier in this set wears USMCís Flame Resistant Organizational Gear (FROG) uniform, Modular Tactical Vest (MTV) and Lightweight Helmet (LWH). The equipment is cast separately and includes Beretta M9 in Serpa holster, two M4 double magazine pouches and utility pouch. A segment of .50 cal ammo belt which could be slung on the figureís shoulder is included as well. All the details on the uniform and equipment have been reproduced very realistically and, as far as my references show, accurately in scale.

The set includes two slightly different heads, both sharing the nicely rendered facial features, one sporting Crossbow ballistic sunglasses.

Assembly:

Assembling this set is very easy. However, take some time to identify all the parts in the set, study the instructions on the box art and test fit the pieces before actually starting the build.

The fit of the pieces is absolutely wonderful. Designed with square-shaped protrusions and indentations, the corresponding pieces are easily aligned and I didnít have to use any putty throughout the build, which is a big plus in my book. I fixed the torso to the legs first, attached boots and arms next, and added the equipment pieces to the tactical vest. I fixed the helmet to the head, and finished the build by attaching the head to the torso.

As the name of the set suggests, the figure is designed for MCTAGS turrets. I have one of Live Resin MCTAGS kits and as soon as I build it, I will do a test fit and update this review. I donít expect any major problems with fitting the figure to the turret itself, but the issue could be adjusting the height of the figure standing inside the vehicle, in order to fit the MCTAGS optimally. Vehicle crews like to mount equipment under the hatch in order to give gunners something to stand on, and Live Resin designed their LRE-35288 set (Boxes to mount standing figures inside various HMMWV turrets) just for that purpose.

Conclusion:

USMC Soldier Figure for MCTAGS and LAV-25 Turrets (LRM-35006) is a very nice 1/35 scale figure set from Live Resin. The resin pieces are cast really well and very easy to clean. The fit of the pieces is perfect and the figure can be assembled with minimal effort. Altogether, this is a great figure to complement all the different MCTAGS turrets available from Live Resin.

Thanks to Yaroslav from Live Resin for this review sample.
SUMMARY
Highs: Perfectly cast in resin and easy to assemble, this figure should do well with 1/35 scale vehicles fitted with MCTAGS turrets.
Lows: None.
Verdict: Highly recommended.
Percentage Rating
95%
  Scale: 1:35
  Mfg. ID: LRM-35006
  Related Link: Live Resin website
  PUBLISHED: Oct 26, 2016
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 93.37%
  MAKER/PUBLISHER: 93.95%

Our Thanks to Live Resin!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Mario Matijasic (Maki)
FROM: CROATIA HRVATSKA

You wonder how did this addiction start? I was a kid when my dad broght home a 1/72 Concord airplane; we built it together as well as couple of other airplanes after that. This phase was just pure fun: glue, paint, decals in no particular order... everything was finished in a day or two. Then I disc...

Copyright ©2017 text by Mario Matijasic [ MAKI ]. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

that looks really nice !!
OCT 27, 2016 - 10:16 AM
I really like this pose. I am glad they based it on a great photo. The Marine looks relaxed but ready. I also like the gear combo he is wearing. Regards, Eric
OCT 27, 2016 - 02:42 PM
Thanks guys. I just noticed I took the photos of the assembled miniature from an odd angle, making the figure look squat. The anatomy is good, it is just the photos. Mario
OCT 27, 2016 - 07:35 PM
Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move