login   |    register
Legend Productions [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
M48A2GA2 Detailing Set
M48A2GA2 Detailing Set
  • move

by: Darren Baker [ CMOT ]

Introduction

When Revell of Germany released a new model of the M48A2GA2 in 1/35th scale, it was quite well received by many modellers as an affordable offering. The model from the box is a pretty fair kit, but there is room for improvement. Legend Productions has taken up that task.

Contents

The product is supplied in the usual card carton that Legend Productions use. The packaging inside the box has insured that the contents have arrived in good condition. Inside the box you will find;
A bag of resin parts
2 photo etched frets
Several brass rods
A length of twine
A length of brass wire

Review

One thing I have noted with all products from Legend Productions is that I have yet to see moulding faults or defects in the castings, that is also the case with this offering. The only issue I have with moulding from Legend Productions is that large castings have a tendency to have very large casting blocks that can be very difficult to remove and they require a lot of clean up. There is a plus point to these large casting blocks, and that is that it prevents distortion of the mouldings and so saves the modeller a lot of work with hot water trying to get things back into shape.

The photo etched items in this set will lift the models detail quite a bit, for me this is perhaps the greatest benefit of the set to most modellers. The brass rods in the set are there to replace the bars on the stowage rack on the rear of the turret and the bars that run around the sides of the turret. The brass wire looks to have been supplied to make the springs for the gunners hatch, I rather like this inclusion which should look quite convincing.

The string or twine supplied in this product from Legend Productions is perhaps the one inclusion I donít really like. I have been a fan of metal cable for the track cables ever since I found this as a possibility. I always felt that twine just does not cut it as wire cable despite how much easier it is to get into place on a model.

The brass rod is an aspect I like of this set, but I would have liked Legend Productions to have supplied line drawings for shaping and cutting the rods. You can of course use the model parts as a guide for shaping the rods, but I still think line drawings would have been better. The photo etched brackets for attaching the rods to the turret will make this a big improvement to a prominent element of the model.

The rear engine vent detail is another area where Legend Productions has offered some great detail. The plate itself is a resin moulding that I believe will fit the model with ease. The photo etched vanes that are then attached add a great deal of finesse and are again an area of the model that will be noticed.

The photo etched track guard supports are well represented in this offering, but I cannot make my mind up if it is a better scale representation or not. The brush guards are a big improvement over the kit offerings as they are a much better match scale wise. The photo etched chains for the caps of the smoke grenade launchers are very fine and will require great care while applying them. Legend Productions has supplied resin smoke grenade launchers and these offer crisper detail.

The gun mantlet and canvas cover have been nicely represented in this offering, the crease detail of the canvas being notable. Attaching the gun barrel will require some care as you lose the installation point and have a butt joint instead. You lose the ability to elevate the gun barrel, but it does look better than what is offered with the kit.

Conclusion

The resin gun mantlet add a nice level of detail to this set and the rest of the resin parts are also a plus, but it is the photo etch and brass parts that are the big stars of this offering for me. I feel this way as other than the mantlet, these will be the improvements that catch the eye of anyone looking at model. The product as a whole will lift the Revell of Germany offering to a good level. The twine or string provided is for me the only real disappointment in this offering by Legend Productions and I hope that they consider adding metal cable in future.
SUMMARY
Highs: The photo etch and details in the product will lift the look of the finished model.
Lows: The string supplied is a poor choice and would have been better is a metal cable had been included.
Verdict: A worthy improvement for the Revell of Germany M48A2GA2
  Scale: 1:35
  Mfg. ID: LF1320
  PUBLISHED: Feb 12, 2016
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 87.83%

Our Thanks to Legend Productions USA!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70ís starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70ís, I have had lots of opportunitie...

Copyright ©2019 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

This is another great set from Legend. Sure wish they added a barel too, because the kit supplied one is not up to today's standards. How are the loader's hatch springs formed? By using the brass wire supplied or are they supplied pre-formed? Thank you for the review.
FEB 11, 2016 - 07:33 PM
Are the tracks of the kit suitable for this version? I've seen some photos of the real tank with different style tracks with rectangular rubber parts, but I don't know enough this tank to know if the old style M-48 tracks are suitable to, although poorly moulded.
FEB 12, 2016 - 08:39 PM
Yes, they are the correct tracks for an M48A2GA2. I don't believe Diehl tracks were ever fitted on the M48A2GA2 unless it was a trial version.
FEB 13, 2016 - 07:50 AM
Probably this was the case.
FEB 13, 2016 - 01:53 PM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move