HOBBY BOSS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Panzer IV/70 (A)
German Panzer IV/70 (A) Sd.Kfz.162/1
  • move

by: Darren Baker [ CMOT ]

Introduction

The demise of Tristar went by with very little acknowledgement, I suspect they passed so quietly as their products were in direct competition with the products of Dragon Models, a company that was at its zenith then. Due to Dragon Models having been so powerful as regards to World War Two German armour, I suspect many of you have never seen what is included in the Tristar kits offerings, well now you get a second chance. HobbyBoss has begun releasing the Tristar models again under their own name and I have to say I am glad that they have.

Contents

The model is packaged in a sturdy cardboard tray and separate cardboard lid, this packaging should hold up well against the postal services of the world. The contents are packaged individually in sealed plastic bags, except where the sprues are duplicated. There is quite a few parts to this model and so packing is tight with very little movement that may cause damage. The contents break down as follows;
15 tan sprues
Lower hull
3 metallic grey sprues
1 vinyl rubber sprue
1 clear sprue
2 brass photo etched frets
1 steel photo etched fret
A decal sheet
An instruction booklet
Promotional material

Review

Taking a look through the contents of the model and noting the moulding quality I am left wondering where it was that Tristar went wrong, the only thing that could be included to improve it from the box is a metal barrel, or at least that is my opinion. The plastic mouldings have a lot of plus points in that they are thin where needed and so look the part. There is a small amount of flash present in some places, but it is not excessive and so it can be easily dealt with by any modeller. It should also be said that despite the number of sprues and parts, very few of them are marked as not for use and so this model will take some time to build.

The suspension of the Panzer IV hull is a quickly identified area of the vehicle and this model captures that detail to a very good degree. The bogie assemblies are a multi-part affair, and if I have correctly understood the instructions and look of the parts the units could be workable or at the very least cemented at the position you require or surface on which it is to be displayed. The look of these parts tells me straight away that this is a kit that should appeal to those who want the most from their models in terms of detail. The wheel units have a vinyl rubber disc at their centre and so can be added and removed from the model. The detail from little I know looks the part with four steel wheels at the front and rubber rimmed wheels on the two rear station of each side. ‘SEMPERIT’ and tyre size is embossed on the tyres for the rear wheels, SEMPERIT does produce tyres, but I am more use to the Continental label being more usual and I have been unable to find information on if this is accurate. I do like that the tyres for the rear wheels are separate vinyl rubber as it makes painting a breeze.

The tracks provided for this model are individual track links moulded in a gunmetal grey plastic, the tracks are also left and right handed, so don’t mix them up. The detail of the track links is very good and the finished result should be pleasing, there are also 72 grousers supplied should you wish to use them. One surprize for me is that with the workable aspect of the suspension units I expected the tracks to also feature a workable nature which they are not, so what are your options? You could glue the tracks in the orientation required for the surface the model is going to be displayed on, or if you prefer seek out a set of workable tracks, it really just depends on your needs.

The rear of the vehicle is nicely detailed and as far as I can tell accurate. A fire wall has been provided for the interior between the fighting compartment and engine bay and this is detailed on the fighting compartment side. The engine deck is equally as nicely detailed and all of the access panels can be left open if wished. While there is no engine for the bay I am sure that after market offerings are available to fill the area. The tools that are supplied have moulded on clamp detail, but the detail is reasonable. The vehicle jack is very nicely detailed and a match for any that I have seen offered in plastic from any other company. The track guards have good detail on the upper surface, but they are on the thick side and have ejector pin marks on the underside that will need to be fixed.

The main gun is a very nice piece of work despite not having a metal barrel. It has been slide moulded with a nice depth to the muzzle, there is a slide mould seam down both sides and there are five sprue gates that will need to be cleaned up. A turned metal barrel would be easier to use, but I question the expense of one in this case as the barrel is that good. The breech detail of the gun is also very good, and will make for a nice starting point for anyone considering a full interior build for the model.

Inside the fighting compartment there is some nice internal detail provided with the model, nothing like enough to be fully exposed, but there is enough for the hatches to be opened. If you place figures with the model the detail that can be seen will be more than enough to please most. The fighting compartment itself is made up with what I believe are scale thickness armour plates, the design of this means that someone who wishes to add a full interior could display it by leaving one of the side panels off or leaving the roof of the compartment so that it can be lifted to display the interior. The mesh schurzen is supplied as steel photo etch parts with plastic mounting brackets, it is these parts that cause me the most concern due to the need to attach another photo etched angled part at the front; this will be a pain I believe.

The finished model is supplied with three finishing options from the box, these are;
Führer Begleit Brigade, Ardennes Offensive, 1944
23rd Panzer Division, He jmakser, Hungary, 1945
Red Army Operated, Vienna, Austria, 1945

Conclusion

I am very impressed with what HobbyBoss has given us curtesy of the Tristar moulds. The quality of this product easily matches up with what is available detail wise today, and in many cases now supersedes the products of the company that possibly caused the demise of Tristar. The price of the model at £27.99 makes it in my opinion an unbeatable model for the money if the Panzer IV/70 (A) is on your shopping list.
SUMMARY
Highs: The suspension detail makes this model something to look for.
Lows: I cannot in truth say there is anything that I would class as a minus, but it is not one for the novice.
Verdict: This is a very good model, factor in price and it becomes a fantastic model.
  Scale: 1:35
  Mfg. ID: 80133
  PUBLISHED: Feb 04, 2016
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 83.94%

Our Thanks to Creative Models!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

I did not know Tristar even made armor, in fact all I recall of them were their Ta 152s. Good looking model.
FEB 05, 2016 - 07:25 AM
I believe you are thinking of Trimaster. Tristar only did armor. KL
FEB 05, 2016 - 07:42 AM
This one I've always wanted to do. It has that look of a quick conversion of a previously used PzKw IV.
FEB 05, 2016 - 07:49 AM
We do have a review of a Tristar Fiesler Storch on Aeroscale - in 1/35 scale. That doesn't seem to have come back yet via HB.
FEB 05, 2016 - 06:22 PM
Hi All, First off, let me say that this one of my favorite vehicles, so what I'm about to explain is not without some sadness. I built the Tristar version of this kit and it was terrible. Darren, did Hobby boss use soft styrene? My kit was made of stuff that resembled the plastic used by Russian manufacturers back in the late 90's, so it was a pain to work with. Also, the rubber used for the tires was like mush (and had a large amount of flash). I am hoping HobbyBoss has not repeated the error. There is, however, a relatively easy fix in the form of the earlier Tristar Pz IV suspension set, which uses plastic tires. Next, comes to something I am sure this kit has too: either the hull is too long, the engine deck is too short or the casemate is too short (I believe it is the engine deck, because their early Brumbar had the same problem. But I have not measured it), because it requires serious shimming to get the fighting compartment into the right place. A good piece of news, however, is that HB has replaced the skirts, but got them wrong. They should be three piece affairs. I recommend replacing them (or cut them, if you are that brave) with the Eduard Thoma screens: Finally, there are numerous engineering gaffes in the kit. Now, I may have feebed out and lost them (or couldn't find them), but the casemate is missing two of the lifting hooks. I replaced them with DML parts Further, the drive sprockets don't fit properly and need modification: Same thing with the idlers: The amount of work required to get this thing together makes you ask, "Why?" Why do we need 6 & 8 piece road-wheels? I'm OK with workable suspensions, but 10 parts per piece is bit excessive and makes it fiddly to put together. My answer is, if this kit is the same as the Tristar kit was, buy the DML offering. Regards, Georg
FEB 10, 2016 - 04:38 AM
Thank you for the info Georg. Touching the parts of the model did not give me the feeling of nasty plastic and the vinyl felt as it usually does.
FEB 10, 2016 - 12:10 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT