AFV CLUB [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Churchill Mk III
Churchill Mk III Dieppe Raid
  • move

by: Darren Baker [ CMOT ]

Introduction

The Churchill tanks first combat on European soil was less than stellar. Churchill tanks were landed on the Dieppe shoreline as part of a multinational Allied Force, the landing force consisting of Canadian, British and American forces supported by the Royal Air Force and the Royal Navy. The Mk III Churchill tanks were sent ashore in support of the infantry and very quickly turned into a disaster for both the men and machines that landed. A number of the Churchill tanks floundered on the beach, having sunk into the shingle up to their lower hulls, the result of which meant they become static pill boxes and easy targets for the German artillery. The infantry with limited support in the way of armour paid a huge price in blood. Over 6,000 troops landed during the raid, most of whom were Canadian, when they retreated back to the boats they left behind in excess of 3,600 dead, wounded and captured troops. If there is one positive that came out of the sacrifice of those men that day, it is that the Allies learnt how not to embark on amphibious landings, and helped to make the D-Day landing 2 years later a success.
Contents

The model is packaged in the now standard tray and lid used by AFV Club. All of the parts with the exception of the tracks are packed either singly or as pairs in plastic bags, the contents of the box breaks down as follows:
  • 5 brown sprues
  • 10 green sprues
  • 1 clear sprue
  • 2 vinyl track links
  • A turned aluminium barrel
  • A box top artwork poster
  • A pack of springs
  • A decal sheet
  • 2 photo etched frets
  • A thick piece of white paper
  • A length of black cord
  • An instruction booklet

Review

First Impressions
Upon first opening the box I was impressed with the sheer quantity of parts packed within. A look through those contents did not dispel my positive opinion, as despite a number of the sprues having been included in previous Churchill tank releases from AFV Club, I detected no obvious moulding issues. I was expecting flash to be making a show by now and there is none present. AFV Club has a good record when it comes to moulding quality and this product re-enforces that. My only concern at this stage is that presently the majority of modellers no longer go to a local hobby shop to get the latest and greatest offerings, and while I am unaware of any issues being raised, I feel the box could benefit in being beefed up a bit to prevent possible damage to the contents while in the post.

Suspension and Lower Hull
Anyone who has tackled an AFV Club Churchill in the past, will be very familiar with the majority of this release, but for those that haven’t read on. The suspension on this model is workable, and so if you wish to display this model on an uneven surface it has the ability to look realistic. The down side of the working suspension are all of the springs that need to be trapped; when AFV Club first released the Churchill tank models with this feature there were a number of complaints, the majority of these complaints were about the difficulty of trapping all of the springs while retaining the workability of this aspect. Lately these complaints have ceased and I am unsure if that is due to the springs having been softened, or modellers becoming comfortable with the task. Love it or loath it the result of all that work in this area, covering ten stages in the instructions, is a very realistic and pleasantly detailed suspension system and lower hull. The hatches in the side of these units can be opened or closed if needed or desired. The only possible issue accuracy wise that may apply to this area, are the idler wheels at the front of the vehicle. While the area between the teeth on the Idler is not easily seen, I believe there should be oval holes in that face in order that collected detritus can get out. I should add that I am not 100% sure if it applies to this variant, but it is my belief and if it concerns you ‘Inside the Armour’ offer a resin and photo etched product to correct it.

Tracks
The tracks supplied with this product are workable two piece offerings in a chocolate brown plastic. The instructions tell you that you need 72 to 73 track links per side and there are 155 track links in the box plus the vinyl rubber links included, this does mean you will need to take care during the removal from the sprue and subsequent clean up as there are not a lot of spares when you take into account the spare links carried. I do feel this inclusion is a good thing, but due to the modellers being a mix of love and hate when it comes to individual track links this could be a plus or a minus depending on the camp in which you fall.

Upper Hull
The upper hull looks good to me, having crisp detail for the most part. All of the hatches can be left open or closed, which is a nice touch providing you have something to show on the inside, which the kit doesn’t. The exhaust nozzles are particularly well replicated, showing some very fine moulding and being both hollow and very thin walled. The BESA machine guns are quite nice, but are let down a little by not having been slide moulded and so the barrels will need to be drilled. There is a full set of track guards supplied with the model, but the instructions indicate very few of the pieces are used. Regarding the lack of track guards, I do not know why they were removed, but every picture I have looked at of a Canadian Churchill shows it minus the guards with the exception of the guard by the side mounted air intakes.

Turret
The turret for this model has a very small number of parts, but some great details. The inclusion of a turned aluminium barrel for the model is a great plus, doing away with the need to sand joints while avoiding flat spots, nice. With this you also get breach end of the gun and another of the nicely detailed BESA MGs, but again the barrel will need to be drilled. All of the hatches in the turret as with the hull can be left open or closed; at least with the turret AFV Club has included some interior with the breach of the main gun. Another plus for me is that AFV Club has provided the correct colour for the fire extinguisher ‘Brass’. The last part I want to point out on the turret is that the length of the aerials is supplied, well done AFV Club as many others fail to provide this data.

Wading Equipment
AFV Club has done a nice job of the wading stacks and exhaust I feel. The intake stakes have been slide moulded and so there are no cement joins to work around. The quick release arrangement of cables is very nicely detailed and should make for an eye catching addition for other modellers even if the wife doesn’t notice. The exhaust stack extensions are again slide moulded and provide a reasonable length of hollowed out area to give the impression of being a tube. The one thing that I am unable to work out is what the thick paper part is supposed to represent on the rear of the tank, I am drawing a complete blank and hope one of the members here can point me in the right direction.

Instructions
The instruction booklet is nicely laid out, and while at this time I cannot tell you if there are any errors, nothing jumped out at me. The instructions use black and white line drawings to guide your progress and includes pertinent written information. I feel most modellers should be able to follow the instructions and have reasonable expectations of completing the build to a satisfactory level.

Decals
The decals included with the kit are off a good standard, the colour appears fine to me with the thickness being good. AFV Club has provided 6 finishing options as listed below, with the German Beutepanzer being an unexpected inclusion.
  • 13 Troop, C Squadron, 14th Canadian Army Tank Regiment (Calgary Regiment)
  • 6 Troop, B Squadron, 14th Canadian Army Tank Regiment (Calgary Regiment)
  • 7 Troop, B Squadron, 14th Canadian Army Tank Regiment (Calgary Regiment)
  • 10 Troop, B Squadron, 14th Canadian Army Tank Regiment (Calgary Regiment)
  • 9 Troop, B Squadron, 14th Canadian Army Tank Regiment (Calgary Regiment)
  • German Beutepanzer

Conclusion

It is good to see companies such as AFV Club giving Allied armour the same attention that some give to German tanks of World War Two. I also like the fact that rather than offering a Churchill tank, AFV Club is now offering a family of Churchill tanks. I know that it is due to getting the most from the moulds, but it was not that long ago where if just one new allied tank came out you counted your blessings and considered yourself lucky. I am by no means an expert on the Churchill tank and I suspect that most of the modellers who build this model won’t be either, and as such I am happy to recommend this model to you. I am aware that there are modellers who like their builds to be just so, one of the beauties of this line of vehicles from AFV Club is that the after market providers are making all kinds of great updates for these Churchill kits, so you can get you model just the way you want it.
SUMMARY
Highs: For me the great attention to detail lavished on the suspension really makes these Churchill models shine.
Lows: The only two things of note are the BESA MGs not having been slide moulded, and the inclusion of string for the tow cables instead of lead cable.
Verdict: A great model of a Churchill, which like the very recently released carpet laying version makes you take notice.
  Scale: 1:35
  Mfg. ID: AF35176
  PUBLISHED: Sep 28, 2014
  NATIONALITY: Canada
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 89.68%

Our Thanks to AFV Club!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

My next model is the Canadian Leopard, and this will be next. I look forward to it, as it will form a (very) slowly growing tribute to Canadian armed forces. I found this review very good, very informative, and positive. Thanks!
MAY 21, 2016 - 05:08 AM
"The one thing that I am unable to work out is what the thick paper part is supposed to represent on the rear of the tank" Someone will probably correct me ,but from pictures I believe it to be part of the water proofing. In pictures it does seem similar in colour. Tamiya's booklet on the Churchill shows some Marks had air deflectors near where Part J is shown mounted. Some work will be needed to make some of the Churchills at Dieppe as the the water proofing remnants are prominent on some. Inside the Armour had after market parts to help with this. Alas I believe he is no longer trading. Good reference for this project would be Dieppe Through the Lens. Bill
MAY 21, 2016 - 07:50 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT