REVELL OF GERMANY [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
LCM 3 and 4x4 Off-Road Vehicle
LCM 3 50ft Landing Craft and 4x4 Off-Road Vehicle
  • move

by: Darren Baker [ CMOT ]

Introduction

The following is the introduction supplied with the model from Revell of Germany;

On 6th June 1944 the Allies landed in Normandy. This famous day is commonly known as D-Day. In 2014, the 70th anniversary of this day, which was so crucial to the outcome of the war, will be celebrated.

From 1942 in the Second World War, a good 8,000 of the LCM 3 (50ft Landing Craft) were used by the American and Royal Navy to transport light armoured cars and materials from ship to shore. These Landing Craft could carry up to 30 tonnes of cargo and were used for landing the Allied Forces in Normandy (D-Day).

With a total build of at least 640,000, the 4x4 off road vehicle is the vehicle most used in warfare. This robust, light and all-wheel drive vehicle was used by the Allied Force in all theatres of war. This vehicle was often brought ashore from landing craft to the coastal areas taken by the troops for supply and transport purposes.


Contents

The model is packaged inside a cardboard tray with separate lid you will find;
  • 5 grey sprues
  • A 1 piece hull
  • 2 green sprues
  • 2 different coloured cord
  • An instruction booklet
  • A decal sheet
  • An advice sheet

Review

First Impressions
My first thoughts when this arrived were ‘that is a big box for a 1/35th scale armour model’, once you open the box you understand why it’s so big. The moulding that stands out is the hull, and this is a very solid and rigid moulding that takes up a significant amount of space in the box. The parts for the LCM 3 are packaged a four clear plastic bags with the 4x4 vehicle parts in a fifth. The LCM 3 parts are very cleanly moulded with no excessive flash to speak of, the inside of the armoured pilot house does have some small and very shallow ejection pin marks that will need to be addressed, there are also a number of ejector pin marks on the top outer face of the inner hull and this problem also effects the framing that is attached to this area; I found perfect plastic putty a great product to tackle this issue.. The 4x4 vehicle, let’s call it a jeep, is in reasonable shape despite its age with no issues other than some flash that will need cleaning up. This model is supplied to represent either a Royal Navy or U.S. Navy craft and there are some subtle differences that you will need to decide on when deciding which one to build. One thing that is disappointing is the gates between the sprues and the parts which in a number of cases are on the heavy sides making parts removal more difficult than needed.

Underside of the Hull
The underside of this beach basher requires very little in the way of work. There is an injection tab left that has not been fully removed; however a little sanding should take care of that. The propellers, prop shafts, support frames and rudders look to be straight forward additions. The LCM 3 is supplied with to support stands for display purposes, however you may have your own ideas about how you want your finished model on show. There are some holes that would look better opened up such as where the bilge is pumped out.

Loading Area
The loading deck and sides looks a good match for the pictures I was able to find online. The upper outer face of the loading deck walls do have some ejection pin marks that will need to be filled and cleaned up. Included with the model is some very nice detail for these areas such as the cargo mooring points and the boat hooks included in the kit. I do question what I believe are the access panels to the bilge in the loading deck as they are two different sizes and there also appears to be more of them than shown in my limited reference and images online. The access panels on the deck are matched by those on the inner side panels, my reference shows four being present on each side and the kit has three, I will not say it is wrong as I believe these were mass produced by a number of factories and so changes I believe would occur. The bar grips on the deck do look to be very good and should allow some nice variation in colour when painted.

Main deck
The main deck has a very nicely replicated diamond tread pattern replicated. The engine vents look ok and will I suspect be perfectly acceptable to most, but these can be further improved with a little sanding to reduce the plastics thickness. The bollards for mooring the LCM are also nicely done even though they are a fairly simple detail. The access hatch for the engine is supplied with the option of it being open or closed, however unless you are going to do a lot of scratch work in the area the only real option is to have it closed.

Pilot House
The pilot house is a pretty basic structure by design however the detail that is there matches the images I have seen of this area. The helm such as it is consists of a control panel supply in the form of a decal in this kit, a left and right throttle and the good old steering wheel. I cannot speak for the accuracy as I could not find reference for the interior of the pilot house.

Realistically by the time you get to the pilot house the LCM is finished depending on the finish you have opted for. In the belief that most will go for the U.S. Navy version, there are two 50cal machine guns with mounts; the machine guns are reasonable but will be lifted significantly via the addition of turned metal barrels from a company such as RB Model. The loading ramp is supplied with the option of being shown either up or down but is not workable.

Extras
There are three Navy crew supplied with the kit and I have to say I am very impressed with them. You are supplied with 2 crew to main the 50cal machine guns and a pilot for the craft. The crew are basic as far as assembly goes with just the arms, the head and the helmet being required to add to the main portion of the figure. The clothing is quite bulky with very nice crease detail and really does look the part. The hand and facial detail is very good, surprisingly good in fact. There are moulding seams that will need to be cleaned up but nothing out of the norm.

Also included are rope buffers, a tyre and fuel barrels. The fuel barrels are not the latest offerings in terms of detail but they are acceptable, you of course can opt to use or not or even replace them. The rope and tyre bumpers are acceptable with very nice detail on the rope bumpers, however rope buffers are hollow on the reverse face which is a little disappointing.

4x4 Jeep
The Jeep in this kit did get some flak when news of this release was announced, and I have to say that the image released did not really show it in a good light. The model is pretty basic but on the whole is reasonable; there is even a separate engine included in the model and the choice of a deployed or folded canvas hood. I accept that the model is not up to current standards but it is acceptable. Included with the Jeep is a trailer which is a nice addition which if not used in conjunction with the Jeep or even the LCM it will find a use somewhere. There is fair detail on the interior and exterior of the trailer, the weakness for me is the tyres which could be better detailed read wise.

U.S. Troops
Included for use with the Jeeps are three figures; a driver, a rifleman and another firing an anti-tank weapon. I have to be honest these figures are poor in both terms of detail and dimensions, I suspect these figures date back to the 1970’s and in this case should have stayed there. The helmet, knife, canteen and M1 rifle are the only parts that I feel are useable but there is quite a bit of flash present on these parts. Do not confuse my opinion on these figures with the LCM 3 crew figures which are very good.

Instructions and Decals
The instruction is a lose leafed booklet that uses black and white line drawings to guide you through assembly, the layout is well considered and follows a logical progression. The decal sheet is very good with good colour and very fine decals in terms of thickness. I do question the inclusion of a 2 star generals ID as it seems very odd for a vehicle coming off of an LCM 3 during the middle of a battle.

Conclusion

The LCM 3 kit and its related figures are very good and well worth picking up when you see it. The Jeep is not brilliant but is fair considering its age and not a bad inclusion as part of the set. The infantry figures are very poor in the set but that should not deter you from picking up a model that is an impressive size and eye catching size.

Revell model kits are available from all good toy and model retailers. For details visit www.revell.de/en, @RevellGermany or facebook.com/Revell

SUMMARY
Highs: A decent sized and accurate model with a good number of options and display possibilities.
Lows: The infantry figures are not up to the standards of the rest of the contents.
Verdict: A model well worth your consideration.
  Scale: 1:35
  Mfg. ID: 03000
  Suggested Retail: £59.99
  PUBLISHED: Apr 10, 2014
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 83.55%

Our Thanks to Revell of Germany!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. All rights reserved.



Comments

Love to see this one built, looks like a decent kit (the LCM), with a little scratch building and some AM parts, could be a real nice model.
APR 10, 2014 - 07:50 AM
The 2 pictures at the end of the review are where I stuck some parts together and the join is exceptionally good.
APR 10, 2014 - 07:52 AM
Hi Darren, Is this the Italeri kit re-boxed but with a more appropriate set of decals? It looks like it is to me. It doesn't look like they included a new ladder for the British version which is a shame, Al
APR 10, 2014 - 07:56 AM
Now build it and show us!....
APR 10, 2014 - 07:59 AM
Alan I believe you are correct and there is no ladder. Kev I am working my way through it.
APR 10, 2014 - 08:21 AM
Yep, this is the Italeri kit #6479 which is the LCM kit and new figures combined with the old 70's era Jeep and US figures.
APR 10, 2014 - 10:16 AM
Hee hee; I know they are recycling the figures with the jeep but the bazookaman is a funny one inside the LCM - I suspect that if the swabbies thought he was about to zap them with backblast they'd open the ramp out to sea!
APR 10, 2014 - 12:14 PM
The thing is Fred rather than it looking like a bazooka it looks more like a recoilless rifle that is normally mounted on a light vehicle.
APR 10, 2014 - 04:48 PM
Hi Darren, Both should build into nice kits then. The Italeri jeep is still the only one that comes with a tarp as far as I know. There is a lot of fun to be had with boats, but be careful like the Sherman you can become addicted Cheers Al
APR 10, 2014 - 06:21 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT