Sunday, September 28, 2008 - 09:29 PM UTC
Monroe Perdu Studios have just announced a new diorama item.
New from Monroe Perdu:

MPD049 - Waterwheel

This 1/32-1/35 scale kit depicts a waterwheel and sluice gate that can be finished to depict a scene in Eastern/Western Europe, the Middle East, the Mediterranean and North America...really any place waterwheels have been used.

You can customize the scene by positioning the waterwheel and sluice gate at any place along the canal. You can include the wall or leave it off. You have complete freedom to paint and finish the kit to indicate a snowy, dusty or lush environment. The kit includes cast resin base, stone wall and stone supports, laser cut card wheel and sluice gate, detail photos of built kits and full color reference photos for paint guidance. Also included are all of our full color wet transfer graphics, previoulsy available as separate items or in other kits. The base measures 7.25" square and is large enough for a variety of vehicles, including a Panther tank. It’s cast in a lightweight resin to help with shipping costs.

More information on the company website:

Monroe Perdu Studios (LINK)
Click Star to Rate
3 readers have rated this story.
Get a daily email with links to all our latest news, reviews, and features.

Comments

Don't know that much about water wheels, but I'm not convinced by this one, something doesn't look quite right! The build and setting look fine but the wheel seems very small and would have had more slats closer together. I shall go and google. Al
SEP 29, 2008 - 08:11 AM
Later: Here's alink to the Water History.Org http://www.waterhistory.org/histories/waterwheels/ Scroll down a bit and you will see what I mean. I did find one that looked like the kit but it was of a garden water wheel!! Of course these came in many shapes and szxes so perhaps it is correct!! Just a thought. Al
SEP 29, 2008 - 08:16 AM
Alan, The image towards the bottom depicts a 'overshot' waterwheel. The one here is an 'undershot' wheel. As for the number of blades this would vary from wheel to wheel as the strength of the current would potentially have a lot to do with how many paddles were needed to generate the correct amount of kinetic energy for milling. Jim
SEP 29, 2008 - 06:10 PM
I think its an awesome little Kit. An opportunity for lots of different scenario's in different era's. i will wait for a cost.
SEP 29, 2008 - 09:14 PM
Hi Jim, Thanks, yip, all shapes and sizes, not a style I've seen before, that I can recall. Still, no matter it will build into a good scene as Rudi says with a lot of options for display. Al
SEP 30, 2008 - 09:14 AM
Hi guys--For what it's worth, Monroe Perdu regulary includes photos of what inspired their kits to help with painting, weathering etc. and the same is true for the Waterwheel. Included with it are several color photos, including two of the original example the kit is based on. So wheels like this one are out there. Rob.
OCT 01, 2008 - 05:15 AM
Jim I'm not trying to change the subject or step on any toes here. I apologise beforehand if this is considered rude. I understand what Alan means about the wheel not looking " right " or " off ". It does look simple. However while scratching the below wheel, I came across tons of ref pics. , and the Perdu offering is a good example of a typical home/farm made wheel. If anyone has price issues , or would like to tackle a scratch wheel , see below pics. It's not that daunting and you should be able to make one. First I found a round ceiling eletrical collar with a lip - the size I figured would look right. I then took coffee stirs and glued and clamped them in three layers. After the two wheels dried , I took balsa [ basswood can be used, it's a tad stronger ] and formed the inner spokes. Then I added more supports and rectangular pieces with wooden ship brads to tie the supports/spoke together. The next part is tricky , but only if your two wheels and " spokes " are not exactly the same dimension wise, Very important . It is equally important when matching up the wheel " axle " . Then I marked off the paddle placements. I used small round basswood and glued the paddles to the sticks. These are later attached with small foil and rivits/nails to show the attachment of the paddle to the spoke, When done it should look like this. You can use this method and make the wheel any size with whatever " spoke " arrangement or however many paddles you want . As I've stated the only critical part is making sure the two wheels and spoke workings are EXACTLY the same or there'll be trouble with the paddle and center axle parts. Once again sorry if I'm off base posting this. I think the Perdu wheel is a nice offering and would look good with many possibilities. Glenn
OCT 06, 2008 - 01:56 AM
Hi Glenn. Personally I don´t see a problem with you showing your (amazing) wheel here. Its great to be informed. This is what the site is doing as well, so we have both choices in the one place. Your wheel is excellent .... but Not everybody has your woodwork skills and/or the time to build your version. I will definately be buying the MP wheel for both reasons mentioned above. As well as the waterwheel, the complete groundwork makes a very tidy base for a mirad of possibilities. Time is a big factor for me today ... and this is one of the coolest beses Ive seen for time. the only negative I can see is .... theres gonna be a lot of them seen from now on!
OCT 06, 2008 - 02:27 AM
That's an amazing scratch-built wheel Glenn. Nice work and thanks for sharing it with us. Your photos and captions would make a nice how-to article. Cheers, Jim
OCT 16, 2008 - 08:14 PM
THIS STORY HAS BEEN READ 12,303 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • MPD049
  • MPD049-3
  • MPD049-2
  • MPD049-1
Monroe Perdu Studios ReviewsMORE
Russian Signs In-Box Review
by Jim Starkweather | of 1 ratings, 100% found this helpful
Paper Zimmerit Built Review
by Matthew Quiroz | of 12 ratings, 100% found this helpful
Market Umbrella In-Box Review
by Charles Reading | of 4 ratings, 100% found this helpful
New Paint In-Box Review
by Danny Wennekes
LED Lights In-Box Review
by Danny Wennekes | of 3 ratings, 100% found this helpful
Café Chairs & Table In-Box Review
by | of 2 ratings, 100% found this helpful

ADVERTISEMENT